FAQ

As well as having complete freedom to arrange the panels, toolbars and documents being edited anywhere on your multiple monitors, you can also customize the menus, toolbars and shortcuts in Altium Designer. To access the customization dialog for the current editor:

• Right-click on a menu bar, or toolbar, and choose the Customize command from the context menu.
• Double-click on a blank area of a menu bar or toolbar.
• Choose the DXP » Customize command from the main menus.

To prevent a panel from docking as you move it in floating mode, hold the Ctrl key down.

For those using Altium Designer 15.1, 16.0, or 16.1, the required F1 mapping 'smarts' are not inherently present in the software. But that doesn't mean that you need miss out on the party!

We've prepared zip files containing variants of the F1 mapping file found in Altium Designer 17.0 - ADES.HelpID - connecting each of these earlier versions to their corresponding documentation at altium.com/documentation:

• ADES_15_1.zip - containg ADES_15_1.HelpID and ServerDlls.txt files, mapping Altium Designer 15.1 to the version 15.1 documentation for Altium Designer.
• ADES_16_0.zip - containg ADES_16_0.HelpID and ServerDlls.txt files, mapping Altium Designer 16.0 to the version 16.0 documentation for Altium Designer.
• ADES_16_1.zip - containg ADES_16_1.HelpID and ServerDlls.txt files, mapping Altium Designer 16.1 to the version 16.1 documentation for Altium Designer.

Download the applicable zip file and add the extracted files to your installation, as detailed below:

1. Close any running instance(s) of Altium Designer.
2. Drop the ADES_xx_y.HelpID and ServerDlls.txt files into the \Help folder of your Altium Designer installation, allowing the new ServerDlls.txt file to replace the existing one.
3. Remove the older existing HelpID files from the \Help folder. These are: ADOH.HelpID, AltiumDesigner.HelpID, and DMAN.HelpID.

4. Restart Altium Designer.

Yes, absolutely. The Altium Designer installation includes several example projects that can be found in the Examples folder (\Users\Public\Documents\Altium\AD<VersionNumber>\Examples for a default installation).

Some key benefits to using Managed Projects are:

• Simplified storage. No need to make decisions about storage locations. Backup and other basic services are taken care of.
• Foundation for collaborative features.
• Enforced version control.
• Beneficiary of a dedicated commenting system.
• Notifications and status. Document status including local modifications is visible to entire design teams.
• Concurrent PCB design works without any complex setup.

The beauty of Managed Projects is that they are version controlled by default, and can be collaboratively worked upon without having to worry about shared drives, servers, agreements etc.

The project will initially only be available to you, the creator, and all Administrators for the Altium Vault. To make it accessible to others simply share it, by configuring its permissions.

If the Convert to Managed Project command is not available, it means that the project is currently under Version Control (in a local, or network VCS Design Repository), or has been so in the past.

This can be resolved by creating a 'clean' copy of the project (one not associated with VCS) in another local folder and converting that version to a Managed Project. To do this:

1. Open the project in Altium Designer:
   • For a project currently under Version Control, use File » Checkout to open (check out) the project from its VCS repository to a local working folder.
   • For a project that is no longer under Version Control, use File » Open Project to locate and open the project from its local folder.
2. Use the Project Packager (Project » Project Packager) to create a single zip file of the project, which by default, will be stored in the project's local source directory – typically, a path such as say C:\Users\Public\Documents\Altium\Projects\MyProject
3. In the operating system, create a local working folder specifically for Managed Projects, for example: C:\Users\Public\Documents\Altium\ManagedProjects
4. Move the project's packaged zip file to the new folder (...\ManagedProjects) and extract its contents: right-click – Extract All and rename to suit. The resulting path to the duplicated project folder would therefore be, say C:\Users\Public\Documents\Altium\ManagedProjects\MyProject
5. Back in Altium Designer, navigate to and open (File » Open Project) the newly duplicated project from its folder – that is, from where the project was unzipped.
6. Right click on the project file and select the Convert to Managed Project command, which should now be available.

To examine design variations, you must compile the design and then switch to the compiled tab of the schematic. The Variants toolbar can then be used to show the configuration of the physical components on that sheet, for the variant chosen in the toolbar.

After selecting an alternate part, the software checks for pin-compatibility between the chosen alternate component, and the original base design component. To be pin-compatible, the alternate must have the same number of pins as the original component, and those pins must be identical in their location, and electrical type. No equality in the graphical primitives used in the symbols for the two components is required.

If the software detects that the alternate component is not pin-compatible, a Confirm dialog will appear, requiring your OK to proceed with the replacement. While you can proceed with the use of a pin-incompatible alternate component, bear in mind the potential impact on the wiring, and that you may also encounter an error violation when performing a subsequent compilation of the design.

Altium Designer's interface can be configured to work with the following VCS applications:

• Altium Designer's internal copy of the Subversion (SVN) version control system.
• An external installation of the Subversion (SVN) version control system.
• An external installation of the Concurrent Versions System (CVS) version control system.
• The Altium Vault's built in Subversion (SVN) system, when using a centralized version control approach to access both vault-based and external Design Repositories.

Each mode must include the same set of pins, if they do not a warning will be generated when the project is compiled. This is required as you can only define one set of pin-to-pad mappings for each footprint. Pins can be hidden in a mode if required, and do not need to be in the same location in each mode.

On the design side, each design component released to a vault is specified using a source Component Definition. A component definition is simply just that - a definition of a particular design component. A definition that ties together the required models and parameters for that component in a clean and ordered fashion. Each component definition on the design-side maps to an Item - a Component Item - in the target vault. To put this another way, you are defining the source definitions that will, when released, provide a set of components which you can re-use again and again in your designs.

A Component Library file (*.CmpLib) is the design-side entity in which to create and manage one or more component definitions. Each component definition is mapped to a unique Component Item in a target vault. To put that another way, each vault-based component is produced by releasing a design-side component definition, stored in a Component Library file.

Yes and No. It all depends whether the vault based component - a Component Item - has an associated Part Choice List Item or not. When a source component definition in a Component Library is first released, the resulting Component Item, referred to as a vault-based component, simply represents the engineering, or design view of that component. It is, in essence, a container into which all information used to model that component in the Design Area is stored. This includes links to all requisite domain models (schematic symbol, PCB 2D/3D component, Sim), as well as parametric information. It has great meaning to the designer using it in a board design, but is not meaningful outside of the design arena. To become a truly 'Unified Component', that unites the Design and Supply Chain areas, the Component Item must be mapped to physical, real-world manufactured parts. This is done by specifying Part Choices for the component, which are saved into a revision of an associated Part Choice List Item in the vault.

And it is this intelligent mapping of a component - from the traditional electronics design arena into the bigger 'product arena' as seen by the rest of the organization - that turns the humble vault-based component into a truly Unified Component!

Yes, batch-release of CmpLibs, SchLibs and PcbLibs is made possible through use of the Release Manager (File » Release Manager). Before you can release component definitions in CmpLibs, the domain models that they reference (schematic symbols and PCB 2D/3D component models) must have already been released to the target vault.

Yes. The Release Manager provides a migration tool that allows you to quickly generate Component Libraries from existing Schematic Libraries. Note that the symbols in the schematic libraries, and the PCB 2D/3D Component models in the associated PCB Libraries must be released to the vault first, since the component definitions that will be generated in the Component Libraries require to link to the resulting Schematic Symbol and PCB Component model Items.

Component Libraries can also be generated directly from the active Schematic Library (or Database Library), using a dedicated command available from the main Tools menu.

Each placed component has a link back to the source Component Item in the vault. This information can be found in the associated properties dialog for the component. At this lowest, individual component level, the placed instance can be updated to a later revision of the same Component Item (or changed to a totally different Component Item) simply by clicking the Choose button. The Choose Item dialog will appear, with the currently linked Item (and revision thereof) focused in the source vault. Select the later revision, or browse for another Component Item to use.

For a single, centralized place from which to effect multiple changes in a batch-like manner, use the Item Manager (Tools » Item Manager). It presents all managed components and/or sheet symbols found in a single schematic sheet (free document), or the set of schematics in a board design project. You have full control over which of these managed entities to update, and how. Select an entry and choose a later revision of the linked Item to be used. Select a group of entries that utilize the same linked Item and choose the next revision in one hit. All proposed changes are reflected back in the manager.

Once changes have been set up as required, simply generate and execute an Engineering Change Order (ECO) to effect those changes.

Yes - if the target database has been created using multiple Excel spreadsheet files (*.xls), there is a limit of 64 sheets that can connect, due to ODBC driver limitations.

Use of the Live Links to Supplier Data feature does not require you to be signed in to your Altium account. Searching is conducted directly with the Suppliers through web services. However, when displaying pricing information in alternate currencies, exchange rates for currency conversion are refreshed daily, provided you are signed in to your account.

Making use of these additional supplier options is a wholly optional exercise. You are not required to fill out these details (on the Data Management - Suppliers page of the Preferences dialog) in order to use the Live Links to Supplier Data feature, they simply offer additional benefits if you are an existing customer of a particular supplier, should you wish to access them.

This will happen when you are signed in to your company's Altium Vault. The Altium Vault dictates centrally which Suppliers are to be used in an organization. While connected to it, the list of Suppliers on the Data Management - Suppliers page of the Preferences dialog will be disabled. It will simply be a read-only reflection of this centrally-defined list, which itself is defined on the Suppliers page of the vault's browser based interface.

The Libraries panel is not used for managing and accessing Pad Via Libraries. Instead, it is the PCB Pad Via Templates panel that provides the required specialized ability to handle both local (within the PCB document) and external (from a Pad Via Library) templates.

You can think of a flat design as if a large schematic sheet has been cut up into a number of smaller sheets - in a flat design all sheets exist on the same level. The connectivity in a flat design is created directly from any sheet to any another sheet - this type of connectivity is referred to as horizontal connectivity.

A hierarchical design is one which has Sheet Symbols to create the parent-child type relationships between the sheets, and, the connectivity is through the Sheet Entries in those Sheet Symbols - not directly from the Ports on one sheet to the Ports on another sheet.

It is The Net Identifier Scope that defines how you want the sheet-to-sheet connectivity to be created. This is set in the Options tab of the Options for Project dialog.

A design is flat when the connectivity is directly from one sheet to another - this connective behavior is defined by setting the Net Identifier Scope to Automatic, Flat or Global. Note that if you choose to use a mixture of Ports and Net Labels to create sheet-to-sheet connectivity, you cannot use the Automatic option, in this situation you must manually set the Net Identifier Scope to Global.

A design is hierarchical when the sheet-to-sheet connectivity is only between Sheet Entries on the parent sheet and matching Ports on the child sheet - this connective behavior is defined by setting the Net Identifier Scope to Automatic, Hierarchical or Strict Hierarchical.

No. A multi-channel design must be hierarchical because the software uses this structural model to instantiate the channels in memory when the design is compiled.

For a multi-channel design, set the Net Identifier Scope to Automatic, Hierarchical or Strict Hierarchical.

The duplication of components and nets is resolved by the software, using the naming scheme selected on the Multi-Channel tab of the Options for Project dialog.

By default, positional annotation is based on the location of the component's designator. If your positional annotation is not performing according to your expectations, ensure that the designators are positioned correctly. Alternatively, you can opt to use the part - more specifically the center of the part - as the reference for component location.

Choice of using Designator or Part is specified within the Annotate dialog.

Here are 2 ways of getting a graphic onto your PCB design:

Pasting from the Windows Clipboard

The PCB Editor supports pasting a metafile directly from the Windows clipboard, onto the current PCB layer, using the standard Windows CTRL+V Paste command. Note that not all image editors place the image data into the clipboard as metafile data. One approach to ensure that this happens, is to first paste the image into Microsoft Word, then copy it from there and paste it into Altium Designer.

Supported metafile data includes bitmaps, lines, arcs, simple fills, and true type text - allowing you to easily paste logos and other graphical symbols. Imported data will be put onto the current layer, adopting the color you have chosen for that layer. The PCB objects created during the paste process are automatically added to a Union. After pasting, the Union's editing handles can be used to fine-tune the size of the pasted image. Unions resulting from a paste can also be resized at any time using the Resize Union command from the right-mouse menu (click to select the required union after launching the command).

The Paste from other applications option, on the PCB Editor - General page of the Preferences dialog, is used to set the Preferred Format to Metafile or Text. For a graphic this option has no impact - each independent shape in the graphic is converted to a region object. When pasting a text string, each character is converted to a text string if the option is set to Metafile, whereas the entire string is pasted as an Altium Designer string, if the option is set to Text.

The Altium logo being pasted as a graphic, each letter in the graphic is converted into a region object.

Placing a Graphic as a Font

It is possible to create a custom TrueType font that contains a graphic as a glyph (one of the characters in the font) and then place a string on the PCB board that uses that font. As well as the ease of use, another great advantage of this method is that if the font glyphs are created from vector graphic images, then they can be accurately scaled.

A font of many standard symbols used in PCB design, including: lead free, recycle, static sensitive, Earth, C-Tick, UL, CE, FCC, and many others, has been created by one of the leading experts in designing with Altium Designer, Darren Moore from Mooretronics. The font is available for download here (dated June 2015), and you can also check the Altium Designer forum thread, for more recent versions in the latest posts.

The font is licensed as Cardware, refer to the Readme.txt included in the download ZIP for conditions of use. The readme also includes a list of the available graphics. Note that many are available with text or without text, the preferred version is chosen by using the upper or lower case letter. The image below shows a sample of the graphics available in the font.

A sample of some of the useful graphics in the Mooretronics font.

The Split Line will remain blue while dragging to a permitted location that will still result in a valid split. If the new location for the end being moved is invalid, for example on the same edge of the board shape as the anchored end, the Split Line will turn red. Attempting to place while the line is red will result in the removal of the Split Line.

You can only fold a board if one of the rigid sections has the 3D Locked option enabled, in the Board Region dialog. Altium Designer needs this to know which section of the board must remain fixed during the folding process.

The most common reason for a polygon clearance rule to fail is that it is targetting the polygon as a single entity, rather than the rule targetting the primitives that make up the polygon. To target the primitives within the polygon, Clearance rules for polygons must use the InPolygon, InPoly, or InNamedPolygon keyword, as opposed to IsPolygon.

Polygon Pours should be thought of as containers for either Region or Track objects, which are regenerated as needed when the polygon pour is repoured. The tracks and regions constitute the physical copper that is created in the PCB manufacturing process. Other objects that correspond to physical copper are arcs, fills, strings, pads and vias. The clearance rule will only operate on these so called 'copper objects'. A clearance rule query will not work if it targets Polygon Pour objects, for example if the query IsPolygon is used. The query needs to target the regions or tracks that are part of the polygon pour by using, for example, InPolygon.

Another thing to ensure is that Polygon clearance rules have a higher priority than the general clearance rule (between All and All). 1 is the highest priority.

Examples:

Set the Clearance between Polygon Pours and all other objects:

Set the Clearance between Polygon Pours attached to nets in the net class Power, and all other objects:

Set the Clearance between Polygon Pours and objects on the Top Layer:

Set the Clearance between a Polygon Pour named PolyPower_VCC_1 and vias in the GND net:

To always display the connection lines, enable the Show All Connections in Single Layer Mode option, on the View Options tab of the View Configurations dialog.

During interactive routing, for the net currently being routed the track segments are either displayed as hatched, or hollow (empty). All hatched segments are placed with the next mouse click. The hollow segment is called the Look Ahead segment. Its purpose it to allow you to plan ahead - to consider where the next segment might be placed, without needing to commit to it.

All 3D navigation is performed by clicking and holding on the right mouse button. RMB on its own to pan, add Ctrl to zoom, or add Shift to rotate.

The main tool used for navigation in 3D layout mode is the rotational sphere, as shown below. Hold Shift down to display the rotational sphere, it will appear at the current cursor location. Then while holding the Shift key down, right-click to engage one of the modes of motion. The selected mode of motion is determined by which of the motion selectors is highlighted when you right-clicked, in the image below you can see that the center dot is highlighted, meaning that as you move the mouse around, the board will rotate around the sphere in all directions, tracking the motion of the mouse. The other modes of motion are flat rotation, X-axis rotation, and Y-axis rotation. Position the cursor over the required motion selector before you right-click, to select that mode.

Shift+right-click and hold to rotate the board around the rotational sphere.

The reference points available in an imported 3D model may not provide a suitable handle to use for positioning that object in Altium Designer. Typical reference points that a designer will want to use are the center of a hole, or the center of a pin.

The process of adding a snap point to the center of a circle (hole), or a pin is the same:

1. Orient and zoom in on the model so the pin or hole is easily accessed.
2. Select the Tools » 3D Body Placement » Add Snap Points from Vertices command.
3. Keeping an eye on the Status bar, position the cursor anywhere over the required target 3D model and click, or press Enter to select. The cursor will change to the 3D positional cursor (blue, six-pointed).
4. Now press the Spacebar, this toggles the command to its second mode, which is to define a Snap Point half way between 2 selected vertices (as detailed on the Status bar).
5. Position the cursor on one edge of the pin or hole, then click to choose that vertex.
6. Position the cursor on the second vertex, on the opposite side of the pin or hole, then click to choose that vertex.
7. A Snap Point will be shown in the center of the pin or hole, as demonstrated in the animation below.

A Snap Point being added between the 2 chosen vertices.

Altium Designer data is mapped into an Excel BOM by entering Field=XXXX and Column=YYYY entries into the Excel template used to generate the BOM. For example, Column=LibRef adds a column listing all the components' library references, and Field=Title adds the value defined in the Title parameter. To learn more, see Including Design Data in the Excel BOM.

This error appears when the primitives in the PCB document do not fit into the area specified in the Gerber export settings. This may be because the board/panel is too big for that area, or because there are off-board objects that are making the extents larger than expected.

To enlarge the film size:

1. Choose the File » Fabrication Outputs » Gerber Files command from the main menus.
2. In the Gerber Setup dialog that appears, go to the Advanced tab.
3. Enter appropriate X (horizontal) and Y (vertical) values for the film size; Try generating the gerbers again.
4. If these values already seem large enough for your PCB, return to the PCB editor, and check for off-board objects.

Finding and removing off-board objects:

Use the View » Fit Document command (keyboard shortcut Ctrl+Page Down). If the PCB file contains objects outside of the board's edges, the screen will resize to contain these objects. If these are far away, the board will appear very small. To remove these objects, go through the following steps:

1. Deselect everything using the Edit » Deselect » All command from the main menus (keyboard sequence X, A).
2. Use the Edit » Select » Outside Area, command from the main menus (keyboard sequence S, O) and drag around the whole board.
3. The off board objects are now selected, and can be deleted. Before deleting, it may be a good idea to open the PCB List panel (by pressing Shift+F12, or choosing View » Workspace Panels » PCB » PCB List), and review the selected objects. Right-click for the option to Remove Non-Selected objects from the list.

Once these objects are deleted, or otherwise returned to their rightful place within the extents of the PCB, regenerate the gerber files. The error message should not appear.

ActiveBOM is a tool that facilitates real-time cost estimation and tracking for a board design, by giving the designer a clear picture of cost and availability of all items associated with that design. With real-time supply chain data returned from external (online) Supplier databases and/or an internal company parts database, and the ability to manually define BOM items and supply chain solutions, a richer (and fuller) BOM results. The designer can get a timely flag if any cost blow-outs are on the near horizon, and can quickly assess item availability, complete with notification if there is a risk in the supply of a chosen part.

Having a clear picture of the total cost of a design and availability of its components - during the design phase - provides numerous benefits to the designer. These include the ability to:

• Implement a design-to-cost development approach.
• Pinpoint parts of the design that excessively contribute to overall cost.
• Make smart component choices, by seeing component cost and availability from both internal (company database) and external (online vendor databases) sources.
• Set target pricing so that procurement specialists know where to focus their efforts on sourcing the required real-world parts.
• Investigate design changes with an understanding of cost implications.

Only a single BOM document can be added to a board design project. To enforce this, after a BOM document has been added to the project, the command is removed from the menus.

The BOM document (*.BomDoc) is an ASCII document. It stores manually-defined (Extra) catalog items and supply chain solutions, along with 'snapshot' data retrieved after refreshing the document - data from placed components on the source design schematics, as well as supply chain data retrieved from Part Choice Lists associated to vault-based components used in the design, and through supplier links added to unmanaged components in the design.

For items used in a design, supply chain solutions are sourced in a number of ways:

• For vault-based components (managed, or 'Unified' components), this data is retrieved automatically from the Part Choice List Items defined and associated to the respective Component Items.
• For components that are not placed from a vault (unmanaged components) this information can be:
  • Defined in situ within the BOM Catalog, through the addition of manually-configured solutions (or 'manual Part Choices' as it were).
  • Sourced through Supplier Links added to a component.

Not a problem. A locally-defined supply chain solution (or 'manual Part Choice') can be defined in fully-manual fashion. This gives you the ability to add and fully define a part from any Supplier, without constraining you to those Suppliers partnered with Altium. Perfect for those items that are just not sold in a Supplier's product catalog, such as shipping costs, testing costs, and perhaps that custom part being made exclusively for you by a specialist!

This happens when you are connected and signed in to an Altium Vault. The Altium Vault dictates centrally which Suppliers are to be used in an organization, with the list of Approved Suppliers configured through the Altium Vault's browser-based interface. This facilitates centralized supply chain management, with designers across the entire organization using the same approved list of Vendors, with which to source supply chain intelligence for parts used in their designs.

So while connected and signed in to an Altium Vault, the list of Suppliers on the Data Management - Suppliers page of the Preferences dialog will be disabled. It will simply be a read-only reflection of this centrally-defined list. This also means that if you are using a legacy Altium Personal Vault, the centralized list of Suppliers will be used until such time you sign out and disconnect from the Altium Vault, at which point the Personal Vault will follow the list of Suppliers defined at the Preferences level.

When changing the Production Quantity, the entries for Actual Price in the solutions for catalog items are dynamically updated, as are the resulting Supply Risk states, if they change as a consequence. However the BOM document needs to be refreshed to recalculate the Actual price per board.

There is no such 'navigation to source' for Extra-Place Holder and Extra-Process catalog/BOM items, since the source for these items is the actual BOM document itself.

Ensure that the BOM document is open, alongside the source schematic or PCB document from which you are performing the cross-probing action.

Once you are happy with the content of your BOM document, on its BOM Components tab, you can use that document as the data source when generating a BOM for use by manufacturing. This is performed through an Output Job Configuration File (*.OutJob) - either directly, or as part of the board release process. Simply add a Bill of Materials output generator as part of the Report Outputs section of the OutJob, and ensure the Data Source is set to be the BOM document (*.BomDoc), or [ActiveBOM Document] to keep your OutJob file as generic and reusable as possible.

Configure the report as required, through the output generator's configuration dialog (double-click to access). The initial settings are transferred from the underlying BOM document (component data and display settings (columns, filters, sorting, grouping, etc)).

If there is a noticeable discrepancy between Supplier Unit Price in the BOM output generator's configuration dialog, and that in the underlying BOM document, check the value entered for Production Quantity in both areas. When configuring the output generator, this can be found in the Supplier Options region of the configuration dialog. By default it is 1, and is not filled with the value entered in the BOM document.

Components used in the design of type Graphical, Net Tie, and Standard (No BOM) will be ignored by the BOM document, and therefore not brought in to the BOM Catalog.

This is related to Core-Managed and Core-UnManaged catalog items. For an item present in the actual design, placed from a vault or non-vault-based library, the Status field indicates the state of synchronization between the item in the BOM Catalog and the item in the source design. Information is sourced from the design. When synchronized, the status will display as . If a source schematic document is modified in some way, the items resident on that sheet will become unsynchronized, as reflected by the status . The items themselves may not have changed in any way. The system is simply flagging a change to design source and therefore advising a refresh of the BOM Catalog data, to resynchronize the BOM with the source documents. Do this by clicking the Refresh button at the top-right of the BOM document.

In a word, no. Only Core items (Managed and UnManaged) will automatically appear in the BOM. These are the parts actually used in the design. Any additional items that you add manually to the catalog – Extra items – will not automatically appear in the BOM. This is reflected by their status . To use any of these items, you need to specifically add instances of them to the BOM. Once this is done, the status will change to , to reflect that they are now being used.

The Extra-Place Holder item type is typically used for those items that will be needed, but are as yet not fully known (to have pricing included in the overall board costing estimation). The Extra-Process item type is typically for things not relating to physical items on the board itself, but required as part of getting the board manufactured, and so incurring cost. These might include shipping costs, testing costs, and so on.

Not at all. Add as many as you require to fully cost your board.

No. A new Item must be created and the Extra-Reserved catalog item linked to the initial planned revision of that Item. The catalog item cannot be linked to an existing Item in a vault.

With no grouping or sorting applied, solutions are ordered according to ranking (where applicable and 3 star solution first), then lowest to highest pricing. For two solutions with the same pricing (and which are not ranked), order is determined by stock level (the solution with greater availability listed first).

The various solution icons are as follows:

- used to distinguish a manually-added solution.

- used to distinguish a solution that has been retrieved for a vault-based Component Item through its Part Choice List.

- used to distinguish a solution that has been retrieved for an unmanaged part in a design, through a defined Supplier Link.

When entering pricing information in the Price Break region for a solution, simply enter a single number representing the start of each new break. Do not enter a range (e.g. 1-9) or use the plus character (e.g. 50+). The latter is added automatically to the number entered, when the pricing information is displayed for the solution. If there are no pricing breaks - so a single flat price irrespective of units purchased - simply enter 1 for the Quantity (the resulting pricing displayed will be 1+).

When adding a solution to an Extra catalog item (Extra-Managed, Extra-Place Holder, Extra-Process, Extra-Reserved), the Actual Price field will display 0 if that item has not been added to the BOM (i.e. is not present on the BOM Components tab of the BOM document). Actual Price is calculated based on number of parts required for a specified Production Quantity, and in accordance with price breaks offered by the Supplier. When a catalog item is not yet present in the BOM, it is not being used for the design.

Yes. Supplier Links added to unmanaged components in a design - through use of the Live Links to Supplier Data feature - are also used as a source of supply chain information, and brought in automatically as solutions into the BOM Catalog. Such solutions are distinguished by the  icon.

The catalog gives you freedom of choice by allowing you to select up to three preferred solutions using the ranking feature. Assigned ranks are unique. No two solutions can be assigned the same rank.

Ranking must be applied to at least one solution for each catalog item, for the supply chain data to appear on the BOM Components tab. This is so that the software knows under which solution (Solution 1, Solution 2, or Solution 3) to present the data.

On the BOM Components tab (and ultimately the generated BOM for manufacturing), ranked solutions appear as Solution 1 (High rank solution, or 3 stars), Solution 2 (Medium rank solution, or 2 stars) and Solution 3 (Low rank solution, or 1 star).

This can help in costing by sheet. For all components grouped in a line of the BOM, this displays the sum of the prices of those components, multiplied by the specified production quantity, and taking into account any price breaks from the Supplier. So in terms of data presented in the BOM, this can be mathematically summarized as:

Total Price = Quantity x Supplier Unit Price x Production Quantity

This can be done in two ways:

• From the BOM Catalog tab - by selecting one or more 'Extra' type items in the catalog and clicking the Add to BOM control.
• From the BOM Components tab - by clicking the Add from Catalog control, and choosing which item to add, from the Add to BOM Components dialog.

Yes. After manual components have been added to the BOM, you can modify their designators. To do so, simply select the entries for one or more components in the main data region, then right-click over the Designator field of a component in that selection and use the Edit Selected Component(s) Designator(s) command. The Change/Remove dialog will appear. This lists the current designator(s) and proposed new designator(s) (initially set to be the same). Simply edit the entries in the New Designator column for the components you wish to change and click OK to effect the changes.

Yes, Altium Designer provides you with the ability to send a crash report through to the Altium Developers, should you encounter an error in the software. In the error/exception dialog that appears, simply click the Send Report button and add a description of what you were doing at the time of the error. The more information, the better the chance of the cause of the crash being reproduced and addressed.

While you can update your installation of Altium Designer to the next primary (or secondary) point release within the same major version stream, it is not possible to update from the previous major version release to the next.

So if you have Altium Designer x.0.1 installed, you can validly update to x.y.z, but you could not update to x+1.y.z,

where:

• x is the current major version.
• x+1 is the next major version.
• y is the current primary point release within the current major version stream.
• z is the current secondary point release within the current major version stream.

So depending on the next version of the software you are considering, you have two choices:

• An update is available within same major release stream - you can update your current installation, or install the new update as a seperate instance, having both installed side-by-side, and using the version that best suits your needs.
• The next major version is available - you have the choice to continue with your current version, or to install the next to access the latest features. Alternatively, have both installed side-by-side, and use the version that best suits your needs.

There are two important factors that facilitate the installation of multiple individual version instances of the software:

• The ability to specify different destination folders during the install, in terms of both the Program Files and Shared Documents install locations.
• The system's use of a Globally Unique Identifier (GUID) for each independent instance. This identifier - which uses the standard 128-bit URN model and is displayed as a 32-character hexadecimal number - is used to uniquely distinguish the application data folders, as well as entries in the registry. When you run a particular instance of Altium Designer, the system handles, through use of this identifier, only those files and registry entries specific to that instance.

For the main program installation and shared documents folders, you have the ability to give those folders meaningful names, which can come in very handy for a machine containing multiple different version instances of the software. But for other folders, they are only distinguished by their GUID. Being able to tell you have the right folder for the right version instance suddenly becomes more difficult. However, help is at hand. By using the Preferences dialog, you can quickly identify the GUID used for the currently open instance of the software and, armed with that knowledge, can pick the right folder through Windows Explorer.

The GUID can be identified on the follow pages of the Preferences dialog (in a standard default installation of Altium Designer):

• Data Management - Backup: in the Path field.
• Schematic - Default Primitives: in the Information region.
• PCB Editor - Models: in the Directory field for Temporary Mesh Data.
• CAM Editor - General: in the Default log files location field.

No, and that's the beauty of On-Demand licensing - it hides the activation process from the user. There is no activation procedure, nor adding license files in a manual fashion - with On-Demand licensing, just sign in to your account and all applicable licenses, designated for your use, will be presented.

Absolutely. Altium Designer continues to support the use of Standalone-type licenses. Standalone licensing allows you to effectively manage your own license through use of a Standalone licensing file (*.alf). This file can be saved, copied and backed-up as required. The .alf file is reusable on a home computer (in accordance with the EULA) simply by copying the file to a specific folder on that computer and then adding the file into your software installation, from the Home - Admin - License Management workspace view (DXP » My Account).

With a Standalone license, the only time you need to sign in to your Altium account (through the Altium portal), is when:

• You are activating the license for the first time.
• You are reactivating the license (required for example when you have deleted the license and don't have a backup of the license file).

Yes, this is possible and depends on the license type you are using. If using an On-Demand license in On-Demand mode, simply use your seat at the office and release it before you go home. Then, at home, access your license, use it, and release it when finished.

If using a Standalone license, simply take a copy of the license file onto your home computer and work away - remembering of course, that you can not run the two installations of Altium Designer simultaneously.

You are in no way forced to stay connected to the internet (logged into the Altium portal) to use an On-Demand license. This is just one method in which you can use an On-Demand license - in On-Demand mode - for example where multiple users share the same license and they do not use Altium Designer all the time. To use an On-Demand license in an 'offline' (not signed in) mode, you can choose to roam with the license (Roaming mode).

The roaming aspect of an On-Demand license allows you to go 'offline' - you can take your computer where you like and whether there is an internet connection or not, you will still be licensed. You need only sign-in to your account if you wish to return the license ahead of time, or if you want to extend the 'roam time'.

The maximum time that you can roam with an On-Demand license is the life of the actual license itself. This is particularly relevant to timed licenses.

Activation of Standalone and Private Server licenses can be performed directly from your web browser using the Altium Dashboard. Access the Dashboard on a non work-critical PC (not running Altium Designer). Once you have obtained the required license file(s) (*.alf), you can take the file(s) to your normal, non-net-connected (and work-critical) PC. For more information, see License Activation.

Sign-in to your account - the Standalone license available to you will be presented in the Available Licenses region, shown as no longer being used. To use it again, simply reactivate the license, using the Reactivate option.

Alternatively, if you are a Group Administrator for your account, activate and acquire the license file through the Altium Dashboard.

The Altium Portal provides the possibility to deliver our users facilities that are linked securely to their account with Altium. On-Demand licensing is just one example of a portal-delivered feature. Access to the SUPPORTcenter and installation management are two others. All of these elements are attainable through your secure (and unique) login to the portal using your Altium Account (AltiumLive) credentials.

All communication with the Altium Account Management servers, through the applicable Altium Portal, is secure over https.

When you use a feature that connects Altium Designer to the on-demand services, Altium may collect the following information:

• MAC Addresses: Altium uses a computer's MAC address to identify a PC. If you sign in on multiple computers, each sign in request will be recorded uniquely.
• HDD serial numbers: Along with the MAC addresses, this information provides a robust way to identify a PC for licensing purposes.
• Altium Designer version: Altium uses the software version to differentiate between products so that the correct services can be delivered for each product.

This information, along with your sign-in credentials, allows the Account Management server to confirm valid license usage.

Altium does not, and shall not, read or gather any information about the designs or files you use within Altium Designer. All connections to the Altium Portal through Altium Designer are secure. Along with the information that is gathered, information that you enter will also be communicated in requests to Altium's Portal. When data is recorded with Altium's Portal, the data will include a time stamp showing when the data was recorded.

If you or your company are concerned about Altium knowing your license usage, you are more than welcome to roam with the licenses, or use Standalone licenses.

You do not remain permanently connected to the Server. Altium Designer communicates with the Account Management server, through the secure Altium Portal, by making a request and receiving a response. At that point the connection is closed. There will be numerous requests to sign in, request the available licenses to display, and so on, but each request is independent and then the connection closes.

While using an On-Demand license, Altium Designer will make a request to the Account Management server, through the secure Altium Portal, at regular intervals to renew the license, and also to see if someone has forced the release of your license remotely. If the Account Management server is unreachable for any reason, you will not lose your license and can continue to use it. Altium Designer will regularly try to restore the connection. Initially Altium Designer does this silently, though you may notice error indications in the title bar which go away once connection is re-established. If the Account Management Server is unreachable for an extended period (say, a few hours or more) you will see message dialogs reminding you to re-establish your Internet connection to the Altium Portal. You will still not lose your license.

It is possible to force-release a seat of an On-Demand license that is being used in either On-Demand, or Roaming modes, directly from within Altium Designer. For example, if you forget to release your seat at work when you leave for the day, you can release it from your home computer then use the open seat at home. The extent of your 'release powers' depends on whether or not you have administrative rights to your licenses:

• Have Administrative Rights - you can remotely release a seat used by any user. The seat they are using will be released and they will lose the license.
• No Administrative Rights - you can only release a seat that you are using (on another computer). The seat will be available again.

From the remote user perspective, if you are Roaming and your license has been released remotely, then you will not notice anything until you sign in. If you are currently using the license in On-Demand mode (or if you sign in while Roaming), then at some point in the next 20 minutes, a warning dialog will appear alerting you to the fact that your license has been released remotely, and by whom, and asking you to use another license to continue using Altium Designer. You will then have a further 20 minutes 'grace' use of the license, during which time you should select and use another license. After this time has elapsed, a second warning dialog will appear and use of the 'released' license will cease. Note that if using the license in On-Demand mode, and you sign out and back in again, the license will be released directly, with no grace periods.

All On-Demand licenses have a count of one or more seats that can be used concurrently. Users can acquire the seats to use the license until the count is reached. Subsequent users will not be able to freely use the license, but are able to use it 'over the limit'. The system will regularly check to see if a seat has become available, and will continue to notify the users that they are over the seat limit, until such time as a seat becomes available and is subsequently acquired.

Each instance of Altium Designer will maintain a seat of the license where, in each case, that license is an On-Demand license and is being used in On-Demand mode.

On-Demand licenses will not expire. If, for some reason, there are errors during background license validation checks or license renewal, you can continue to use the license and save your work, but you will receive a message of some sort. The message will depend on the situation:

• If you have lost your internet connection, a message will be displayed in Altium Designer's title bar alerting you to the fact that there is an "error signing in".
• If your session in the portal has timed out for some reason, you may see a sign in dialog.
• In other situations you may see a message that says "The Altium portal was not able to renew your license. Altium Designer will retry shortly."

A session can timeout in several ways. If no requests are made to the portal for an hour or more, the session will timeout. The session will also timeout after about 12 hours, regardless of previous activity. If the portal gets restarted while you are signed in, this will also register as a session timeout.

Altium Designer's Private Server licensing offers you floating license capability through implementation of your own dedicated Private License Server. Your administrator sets up this central server (also referred to as a network license, or local license server) to access and use Private Server licenses. Once a license is in use on the server, that server can then serve the license to multiple local computers. Users on the local network do not need to sign in to their Altium accounts to acquire the seats from the Private License Server.

The Private License Server communicates with Altium's activation systems through port 443. This port will need to be open to activate using this method.

During activation, the license files are encoded to be either 'Primary' or 'Secondary', depending on the type of Private License Server you have configured. 'Primary-encoded' license files can not be used with a Secondary server and vice-versa.

To fully backup your Private Server license, you should activate the license on a computer set to be the Primary server and save the 'Primary-encoded' license file(s). Then activate the license on a second computer, set to be the Secondary server, and save the 'Secondary-encoded' license file(s).

Alternatively, if you are a Group Administrator for your account, activate the license through the Altium Dashboard, selecting which type of server you wish to activate the license for. When activating for primary or secondary server, repeat the activation process for each supported release of Altium Designer that you wish the license to serve. As part of the activation process your browser will download the .alf license file(s).

In some cases, a Private Server license can serve multiple versions of the software. If adding such a license back to your relocated Private License Server, you can just add the .alf file(s) corresponding to the version(s) of software you wish to serve - you do not have to add all license files, for all served versions. The Version field in the License Usage region of the Licensing dialog - accessed when setting up your Private License Server - will indicate which versions of the software the added license will serve.

Simply reactivate the license, using the Activate button in the Licensing dialog (accessed when setting up your Private License Server). Note that this requires you signing-in to your Altium account, and therefore will require connection to the internet.

Alternatively, if you are a Group Administrator for your account, activate your license again through the Altium Dashboard.

The security model for Microsoft Windows 7 and Windows 2008 Server operating systems (and above) does not allow the icon for a Windows Service to be displayed while you are remote connecting into a computer that has that service:

• Windows 7 and later - the security model does not allow the Altium Designer Private License Server to create a tray icon. In order to manage licenses, the server must be launched as an application.
• Windows 2008 Server and later - when you connect to the Server through terminal services, the service is not allowed to interact with the desktop and therefore the service icon is not visible.

If you are installing on a machine with one of these operating systems, you will need to launch the Private License Server in "Application mode". For full details on how to do this, see the section Configuring the Private License Server on Windows 7, Windows Server 2008 and Above, on the Private Server Licensing page.

If a user has access to multiple Private Server licenses, and they open a document kind that is licensed by those multiple licenses, they will be prompted to select which license to use. Once a user has selected a license, they retain the use of that license until they close Altium Designer.

You can view license usage from the Home - Admin - License Management workspace view within Altium Designer (DXP » My Account). Simply click on the plus (+) symbol to the left of a license entry in the Available Licenses grid - the expanded details show who is using a seat of the license, and in which mode.

For licenses served through a Private License Server, the server can also provide information about license usage - refer to the section Examining License Usage, on the Private Server Licensing page for more details.

Within Altium Designer, management of extensions for the software is performed from within the dedicated Extensions & Updates view - one of several views available under Altium Designer's Home page. Access from the Admin view of the Home page, or directly using the DXP » Extensions and Updates command.

For each installed extension, its associated installation files are stored in a dedicated folder, named after that extension. Extension folders can be found along the following path: \ProgramData\Altium\Altium Designer <GUID>\Extensions. In addition, the root Extensions folder contains a registry file - ExtensionsRegistry.xml - which is used to keep track of all extensions currently installed for that instance of Altium Designer.

Only those with administrative privileges (users in the account who are members of the Group Administrators group) will have access to the Dashboard, and the ability to view and modify their organization's account.

A user is an administrator for the account if they are added as a member to the Group Administrators group. Admission to this group occurs in two ways:

• When a new license is purchased for the account, the Notification Contact for that license is added automatically to the group.
• A user can be manually added to the group by another account administrator. In other words, a member of the Group Administrators group has the power to bestow administrator powers to another user, simply by making them a member of this group.

The uploaded image of your company's Logo can be 220x220 pixels or less, and either JPG or PNG format.

An organization's profile can be accessed by clicking the related link to that profile, on the profile page of any of its users. A link to an organization's profile page can also be accessed from other areas within the AltiumLive community, typically located in the vicinity of a user's name. For example in a Forum post, or in a BugCrunch report.

To make your organization's profile private - hidden from viewing by the wider AltiumLive community - ensure the Public option is disabled, in the General Information region of the Dashboard's Profile page.

A new user can only be added to the account, provided the email address supplied is not already in use by an existing user. If you attempt to create a new user with a duplicate email address, an error dialog will appear, alerting you to this fact.

This is performed by deactivating, then reactivating the required user. It is the act of activation that triggers the password reset and issuance of an email to that user containing a new, temporary password.

Outside of the Dashboard, a user can reset their own password. This is performed from the AltiumLive Sign-In page, by clicking the Forgot Password link. An email will be sent to that user containing a new, temporary password.

Your password must be at least 8 characters long. It must contain only English letters, one digit, one upper case character, and one lower case character. It cannot contain spaces.

The delete operation cannot be undone. If you delete a user by mistake, you will need to add that user back, in the same way that you would add any new user to the account.

A user can be added as a member to any number of defined groups for an Altium Account.

To remove a user from the list of members for the group, simply uncheck the associated Member checkbox - they will be removed from the list upon updating.

No. You cannot add licenses to, nor delete licenses from, your account using the Dashboard. You will need to contact Altium Sales to discuss purchase of licenses for your account.

This is the expiry date for Subscription on the license, the date on which your right to access content and updates for the software ends.

In terms of license allocation within the Dashboard, you can either browse to a particular license and allocate which groups can use it, or you can browse to a specific group and allocate one or more licenses to it. This applies only to On-Demand and Standalone type licenses.

Both On-Demand and Standalone type licenses can be allocated (targeted) for use by specific groups within the account. This allows you to control exactly who has access to, and use of, your licenses. For a multi-seat On-Demand License, you can assign seats across one or more defined groups. This provides global floating license capability - within the geographic scope of your license and the conditions set out in the EULA - without needing to implement your own server.

Yes. Simply drill down to the management page for such a license and click the Activate button.

When activating a Standalone License, you can activate for any of the supported releases of Altium Designer, but only one at a time. When activating a Private Server License, you must repeat the activation process for each supported release of Altium Designer that you wish the license to serve.