Sch_Dlg-ModelManagerFormModel Manager_AD
Created: 6月 17, 2022 | Updated: 6月 17, 2022
| Applies to version: 5
Summary
The Model Manager dialog provides controls to add, remove or edit models for schematic symbols.
Access
The dialog is accessed from the schematic library editor in the following ways:
- Click Tools » Model Manager from the main menus.
- Right-click on a component in the SCH Library panel then select Model Manager from the context menu.
Options/Controls
The left region displays all existing components in the current schematic library; the right region displays related PCB models and preview.
- Mask – type a component name in this field to filter the contents. Use "
*
" as a wildcard character. - Component list – lists all existing components in the current schematic library and their description.
- Model list – lists all models related to the selected component. The right-click menu of this region includes commands to Add, Copy, Paste, Remove, or Edit a model.
- Add – click to access a drop-down to choose from the model options listed below. For each option, an associated dialog will open to allow you to customize (if necessary) and add the desired model.
Footprint
– physical layout that is required on the printed circuit board in order to mount a component or physical attachment.-
Pin Info
– add a Pin Info file, which can be used as an FPGA/MC pin description for any third-party FPGA tools, or for other types of components. PCB3D
– add a 3D model to the component.Simulation
– add a spice model to the component if you want to run a circuit simulation.Ibis Model
– add an Ibis model to enhance the modeling of IC pins while performing Signal Integrity analyses.Signal Integrity
– add a Signal Integrity model to configure and control signal integrity analyses.
- Copy – click to copy the desired model from the list.
- Paste – click to paste a model into the list. The new model will appear at the bottom of the list.
- Remove – click to remove a selected footprint(s).
- Edit – click to open the PCB Model dialog in which you can edit an existing model.
- Refresh Preview – click to refresh the model preview. Click 2D/3D to toggle between the 2D and 3D preview.