PCB_Dlg-SetupAnnotatePositional Re-Annotate_AD

現在、バージョン 15.1. をご覧頂いています。最新情報については、バージョン PCB_Dlg-SetupAnnotate((Positional Re-Annotate))_AD の 22 をご覧ください。

The Positional Re-Annotate dialog.
The Positional Re-Annotate dialog.

Summary

Use this dialog to configure the scope of annotation (components (further targeted by side, or selection), or free pads), the direction of annotation (based on object position), and additional options, such as a starting index, and whether locked designators should be protected. As you select a style of annotation, a graphical depiction is shown within the dialog as a visual indication of how annotation will transpire.

Access

To open the dialog, select Tools » Re-Annotate from the toolbar.

Options/Controls

  • Annotate Direction - Choose the order of re-annotation. The There are 5 options available:
    • 1 By Ascending X Then Ascending Y
    • 2 By Ascending X Then Descending Y 
    • 3 By Ascending Y Then Ascending X 
    • 4 By Descending Y Then Ascending X 
    • 5 Name from Position
  • Annotate Scope - Specify the scope of re-annotation. Select scope by Components (Top Side, Then Bottom Side, Top Side Only, Bottom Side Only, or Selected Components) or Pads (Free Pads).
  • Protect Locked Designators - Check the box to ignore components whose designators are locked during re-annotation.
  • Comparison Threshold - The position distance threshold to change re-annotation direction.
  • Start Index - Specify the start index for re-annotation.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
注記

利用できる機能は、Altium 製品のアクセスレベルによって異なります。Altium Designer ソフトウェア サブスクリプション の様々なレベルに含まれる機能と、Altium 365 プラットフォーム で提供されるアプリケーションを通じて提供される機能を比較してください。

ソフトウェアの機能が見つからない場合は、Altium の営業担当者に連絡して 詳細を確認してください。