Sch_Cmd-ChangeCurrentTemplateChangeCurrentTemplate_AD

Applied Parameters: TemplateSource=Project

Summary

This command is not a command in the usual sense, but rather gives access to a sub-menu of currently available schematic templates for the active project. You can then change template as required, from those available, and apply to the active schematic document, all schematics in the active project, or all open schematic documents (irrespective of the project to which they belong). A schematic template (*.SchDot) is a document that holds user-defined sheet size, border and title block descriptions, that can be referenced by (linked to) a schematic sheet, thereby negating the need to define these common attributes again and again.

Access

Project templates are available from the Design » Project Templates sub-menu.

Use

Simply choose the required template to use, from those available on the sub-menu. The Update Template dialog will appear. Use this dialog to determine the scope of the update, both in terms of which schematic documents are to use this template, and how parametric information (typically defined in the template's title block region) is handled.

After clicking OK, the template will be applied to the schematic(s) and an information dialog will appear, summarizing on how many documents the template has been set.

Tips

1. When applying the template to all schematic documents in the current project, all documents that are currently closed will be opened as the update is made.
2. The schematic template currently being used by the active schematic document, can be seen on the Template tab of the Document Options dialog.

Applied Parameters: TemplateSource=General

Summary

This command is not a command in the usual sense, but rather gives access to a sub-menu of currently available schematic templates - general templates that are part of the Altium Designer installation, and therefore available to all projects. You can then change template as required, from those available, and apply to the active schematic document, all schematics in the active project, or all open schematic documents (irrespective of the project to which they belong). A schematic template (*.SchDot) is a document that holds user-defined sheet size, border and title block descriptions, that can be referenced by (linked to) a schematic sheet, thereby negating the need to define these common attributes again and again.

Access

General templates are available from the Design » General Templates sub-menu.

Use

Simply choose the required template to use, from those available on the sub-menu. The Update Template dialog will appear. Use this dialog to determine the scope of the update, both in terms of which schematic documents are to use this template, and how parametric information (typically defined in the template's title block region) is handled.

After clicking OK, the template will be applied to the schematic(s) and an information dialog will appear, summarizing on how many documents the template has been set.

Tips

1. When applying the template to all schematic documents in the current project, all documents that are currently closed will be opened as the update is made.
2. The schematic template currently being used by the active schematic document, can be seen on the Template tab of the Document Options dialog.
3. You can define the default template to be used when creating new schematic documents in a project, using the Template field, on the Schematic - General page of the Preferences dialog.

Applied Parameters: TemplateSource=Configuration

Summary

This command is not a command in the usual sense, but rather gives access to a sub-menu of currently available vault-based schematic templates - templates that have been released into an Altium Vault, and have been made available for reuse by the user when signing in to the organization's Altium Vault. You can then change template as required, from those available, and apply to the active schematic document, all schematics in the active project, or all open schematic documents (irrespective of the project to which they belong). A schematic template is a document that holds user-defined sheet size, border and title block descriptions, that can be referenced by (linked to) a schematic sheet, thereby negating the need to define these common attributes again and again.

Access

Vault-based templates are available from the Design » Configuration Templates sub-menu.

Use

Simply choose the required Schematic Template Item to use, from those available on the sub-menu. The Update Template dialog will appear. Use this dialog to determine the scope of the update, both in terms of which schematic documents are to use this template Item, and how parametric information (typically defined in the template's title block region) is handled.

After clicking OK, the template will be applied to the schematic(s) and an information dialog will appear, summarizing on how many documents the template has been set.

Tips

1. When applying the template Item to all schematic documents in the current project, all documents that are currently closed will be opened as the update is made.
2. The Schematic Template Item currently being used by the active schematic document, can be seen on the Template tab of the Document Options dialog.
3. While file-based general and project templates must be SchDot format, a Schematic Template Item's source can be either SchDoc or SchDot.

Applied Parameters: None

Summary

This command is used to quickly browse to, and open, a different schematic template file, that is stored in a place other than the location specified for the General or Project templates. You can then apply the chosen template to the active schematic document, all schematics in the active project, or all open schematic documents (irrespective of the project to which they belong). A schematic template is a document that holds user-defined sheet size, border and title block descriptions, that can be referenced by (linked to) a schematic sheet, thereby negating the need to define these common attributes again and again.

Access

This command can be accessed from the Schematic Editor by:

• Choosing the Design » Project Templates » Choose Another file command, from the main menus.
• Choosing the Design » General Templates » Choose Another file command, from the main menus.

Use

After launching the command, a standard Open dialog will appear. Use this to browse to, and open, the required schematic template file (can be *.SchDot, or *.SchDoc format). After clicking Open, the Update Template dialog will appear. Use this dialog to determine the scope of the update, both in terms of which schematic documents are to use this template, and how parametric information (typically defined in the template's title block region) is handled.

After clicking OK, the template will be applied to the schematic(s) and an information dialog will appear, summarizing on how many documents the template has been set.

Tips

1. When applying the template to all schematic documents in the current project, all documents that are currently closed will be opened as the update is made.
2. The schematic template currently being used by the active schematic document, can be seen on the Template tab of the Document Options dialog.

Applied Parameters: Action=ChooseTemplatesFolder

Summary

This command is used to access the relevant dialog, with which to define the path to the Project, or General schematic templates. A schematic template is a document that holds user-defined sheet size, border and title block descriptions, that can be referenced by (linked to) a schematic sheet, thereby negating the need to define these common attributes again and again.

Access

This command can be accessed from the Schematic Editor by:

• Choosing the Design » Project Templates » Manage Project Template Folder command, from the main menus.
• Choosing the Design » General Templates » Manage General Template Folder command, from the main menus.

Use

While a single command, its use depends on where it is accessed:

• From Project Templates sub-menu - accesses the Options tab of the Options for Project dialog. Specify the path to the project templates using the Schematic Template Location field.
• From General Templates sub-menu - accesses the Data Management - Templates page of the Preferences dialog. Specify the path to the general templates using the Template Location field. For a default installation of the software, this location will be: \Users\Public\Documents\Altium\AD<Version>\Templates.