Sch_Cmd-ChangeCurrentTemplateChangeCurrentTemplate_AD

Created: Februar 09, 2021 | Updated: Februar 10, 2021 | Applies to version: 21

This document is no longer available beyond version 21. Information can now be found here: Using a Sheet Template (Workspace or Local) for version 24

Parent page: Schematic Commands

The following pre-packaged resources, derived from this base command, are available:

Local

Applied Parameters: TemplateSource=Local

Summary

This command is used to access the relevant sub-menu command to define the local template. A schematic template is a document that holds user-defined sheet size, border and title block descriptions that can be referenced by (linked to) a schematic sheet negating the need to define these common attributes again and again.

Access

This command can be accessed from the schematic editor by choosing Design » Sheet Templates » Local from the main menus or from the Design pop-up menu (D) in the design space.

Use

Select the required local template from the list in the sub-menu. The Update Template dialog opens in which you can update to the current template then an Information dialog opens displaying that the template was updated.

Server

Applied Parameters: TemplateSource=Server

Summary

This command is used to access the relevant sub-menu command to define the server template. A schematic template is a document that holds user-defined sheet size, border and title block descriptions that can be referenced by (linked to) a schematic sheet negating the need to define these common attributes again and again.

Access

This command can be accessed from the schematic editor by choosing Design » Sheet Templates » Server from the main menus or from the Design pop-up menu (D) in the design space.

Use

Select the required server template from the list in the sub-menu. The Update Template dialog opens in which you can update to the current template then an Information dialog opens displaying that the template was updated.

Druckversion

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

Sch_Cmd-ChangeCurrentTemplateChangeCurrentTemplate_AD

Summary

Access

Use

Summary

Access

Use

Was this page helpful?