Altium Designer 기술문서
...
((Dialog Reference))_AD
Dialogs((M to R))_AD
WorkspaceManager_Dlg-ParameterPropertiesFormParameter Properties_AD
Created: June 09, 2022 | Updated: June 09, 2022
| Applies to version: 22
This document is no longer available beyond version 22. Information can now be found here: Project Options - Parameters for version 25
The Parameter Properties dialog
Summary
This dialog allows you to specify the properties of a parameter when attached at the project or variant level. Parameters can be used to provide additional design information. Project-level parameters, for example, can be used in global fashion as the source for special string parametric data to be added to schematic sheets and/or the PCB document - the latter of which does not support localized parameters.
Access
The Parameter Properties dialog can be accessed in the following ways:
- For a PCB project (*.PrjPcb), click the Add or Edit buttons on the Parameters tab of the Project Options dialog (Project » Project Options from the schematic or PCB editor main menus).
- For a PCB project (*.PrjPcb), click the Add or Edit buttons in the Edit Project Variant dialog - accessed from the Variant Management dialog (Project » Variants from the Schematic or PCB editor's main menus) when adding a new variant or editing an existing one.
- For an Integrated Library project (*.IntLib), click the Add or Edit buttons on the Parameters tab of the Project Options dialog.
Options/Controls
- Name - use this field to give the parameter a meaningful name reflective of its purpose.
- Value - use this field to give the parameter its value.