Altium Designer 기술문서
...
((Dialog Reference))_AD
Dialogs((M to R))_AD
PCB_Dlg-MoveRoom_AskUserDlgRoom containing No Net - Locked Objects_AD
Created: July 07, 2022 | Updated: July 07, 2022
| Applies to version: 22
This document is no longer available beyond version 22. Information can now be found here: Changing Room Size and Location for version 25
참고
Altium 제품에 접근할 수 있는 레벨에 따라 사용할 수 있는 기능이 달라집니다. 다양한 레벨의 Altium Designer Software Subscription에 포함된 기능과 Altium 365 플랫폼에서 제공하는 애플리케이션을 통해 제공되는 기능을 비교해보세요.
소프트웨어에서 논의된 기능을 찾을 수 없는 경우, Altium 영업팀에 문의하여 자세한 정보를 확인해주세요.
The Room containing No Net / Locked Objects dialog
Summary Copy Link Copied
The Room containing No Net / Locked Objects dialog allows you to confirm which objects attached to a room to move when moving a room.
Access Copy Link Copied
This dialog can be accessed in the following ways:
- From the main menus, select Design » Rooms » Move Room then click on a room.
- Right-click on a room in the workspace then select Room Actions » Move Room from the context menu.
Options/Controls Copy Link Copied
- No Net Objects - enable to move objects with no nets with the room.
- Locked Objects - enable to move locked objects with the room.
- Don't ask me about moving room's locked/no net objects until next PCB session (use currently selected settings) - enable this option to save the selected settings and continue using them for the rest of your PCB session. The dialog will not open again unless a new session is started.