Altium Designer 기술문서
...
((Dialog Reference))_AD
Dialogs((M to R))_AD
WorkspaceManager_Dlg-ParameterPropertiesFormParameter Properties_AD
Created: September 27, 2017 | Updated: March 05, 2018
| Applies to versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1, 20.2 and 21
Now reading version 19.1. For the latest, read: WorkspaceManager_Dlg-ParameterPropertiesForm((Parameter Properties))_AD for version 22
The Parameter Properties dialog
Summary
This dialog allows you to specify the properties of a parameter when attached at the project or variant level. Parameters can be used to provide additional design information. Project-level parameters, for example, can be used in global fashion as the source for special string parametric data to be added to schematic sheets and/or the PCB document - the latter of which does not support localized parameters.
Access
The Parameter Properties dialog can be accessed in the following ways:
- For a PCB project (*.PrjPcb), click the Add or Edit buttons on the Parameters tab of the Project Options dialog (Project » Project Options from the schematic or PCB editor main menus).
- For a PCB project (*.PrjPcb), click the Add or Edit buttons in the Edit Project Variant dialog - accessed from the Variant Management dialog (Project » Variants from the Schematic or PCB editor's main menus) when adding a new variant or editing an existing one.
- For an Integrated Library project (*.IntLib), click the Add or Edit buttons on the Parameters tab of the Project Options dialog.
Options/Controls
- Name - use this field to give the parameter a meaningful name reflective of its purpose.
- Value - use this field to give the parameter its value.
