Altium Designer 기술문서
...
((Dialog Reference))_AD
Dialogs((A to F))_AD
WorkspaceManager_Dlg-CloneProjectDialogFormClone Project_AD
Created: June 15, 2021 | Updated: July 21, 2022
| Applies to version: 21
This document is no longer available beyond version 21. Information can now be found here: Cloning a Project for version 25
참고
Altium 제품에 접근할 수 있는 레벨에 따라 사용할 수 있는 기능이 달라집니다. 다양한 레벨의 Altium Designer Software Subscription에 포함된 기능과 Altium 365 플랫폼에서 제공하는 애플리케이션을 통해 제공되는 기능을 비교해보세요.
소프트웨어에서 논의된 기능을 찾을 수 없는 경우, Altium 영업팀에 문의하여 자세한 정보를 확인해주세요.
Summary Copy Link Copied
The Create Project Copy dialog is used to copy a managed project, which is then stored in a repository connected to a server. By default, the original project name will be used with the suffix ' - Copy'.
Access Copy Link Copied
The dialog is accessed in the following ways:
- Right-click on a managed project in the Projects panel then select Clone from the context menu.
- From the Explorer panel, select a project within the Projects folder then click the
button to access the Clone command. - From the Open Project dialog, select the Open Project As Copy link from the Project Information region located in the Server and Workspace tabs.
Options/Controls Copy Link Copied
Simple Mode
- Project Name - the name of the managed project.
- Description - enter the desired description of the managed project.
- Advanced / Simple- click to access the Advanced/Simple version of the dialog.
Advanced Mode
- Folder - click
to open the Choose Folder dialog, which is a trimmed-down version of the Explorer panel, where you can filter through various server folders. Select the folder in which you'd like the copied project to reside then click OK. - Local Storage - click to select the field where you would like the project to be stored on your hard drive prior to its committal to the centralized Design Repository. The default location is defined in the System - Default Locations page of the Preferences dialog.