PCB_Dlg-IncludeSnapPointFormChoose Selectable Points_AD

  The Choose Selectable Points dialog

Summary

The Choose Selectable Points dialog is used to select how a point is chosen on a 3D model when running various 3D Body placement commands.

Access

This dialog is opened after running a command that requires a point on a 3D model to be selected. Run the command, click on a placed 3D model then press the Tab key. Any of the following commands can be used to access the dialog:

  • Tools » 3D Body Placement » Orient And Position 3D Body.
  • Tools » 3D Body Placement » Position 3D Body.
  • Tools » 3D Body Placement » Set Body Height.
  • Tools » 3D Body Placement » Measure Distances.

Options/Controls

Up to two point types can be included:

  • Include Vertices - enable to be able to select and measure from any vertices on the 3D model.
  • Include Snap Points - enable to be able to select and measure from any placed snap points on the 3D model.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
참고

Altium 제품에 접근할 수 있는 레벨에 따라 사용할 수 있는 기능이 달라집니다. 다양한 레벨의 Altium Designer Software Subscription에 포함된 기능과 Altium 365 플랫폼에서 제공하는 애플리케이션을 통해 제공되는 기능을 비교해보세요.

소프트웨어에서 논의된 기능을 찾을 수 없는 경우, Altium 영업팀에 문의하여 자세한 정보를 확인해주세요.