Altium Designer 기술문서
...
((Dialog Reference))_AD
Dialogs((A to F))_AD
PCB_Dlg-IncludeSnapPointFormChoose Selectable Points_AD
Created: July 28, 2015 | Updated: June 16, 2017
| Applies to versions: 15.1, 16.0, 16.1, 17.0 and 17.1
Now reading version 16.0. For the latest, read: PCB_Dlg-IncludeSnapPointForm((Choose Selectable Points))_AD for version 22
The Choose Selectable Points dialog.
Summary
This dialog allows the designer to select how a point is chosen on a 3D model, when running various 3D Body placement commands.
Access
This dialog is opened after running a command that requires a point on a 3D model to be selected. Run the command, click on a placed 3D model, then press the Tab key. Any of the following commands can be used to accessed the dialog:
- Tools » 3D Body Placement » Orient and Place 3D Body
- Tools » 3D Body Placement » Position 3D Body
- Tools » 3D Body Placement » Set Body Height
- Tools » 3D Body Placement » Measure Distances
Options/Controls
Up to two point types can be included:
- Include Snap Points - Enable to be able to select and measure from any placed snap points on the 3D model.
- Include Vertices - Enable to be able to select and measure from any vertices on the 3D model.