Altium Designer 기술문서
...
((Dialog Reference))_AD
Dialogs((A to F))_AD
PCB_Dlg-EqualizeNetsOptionsFormEqualize Nets_AD
Created: October 27, 2017 | Updated: April 30, 2020
| Applies to versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1, 20.2 and 21
Now reading version 18. For the latest, read: PCB_Dlg-EqualizeNetsOptionsForm((Equalize Nets))_AD for version 22
The Equalize Nets dialog
Summary
The Equalize Nets dialog is used to match the length of nets identified by the Matched Lengths design rule. Before launching the dialog, ensure you have set up a Matched Lengths design rule covering the nets whose length you wish to equalize.
Access
The dialog is accessed from the PCB editor by clicking Tools » Equalize Net Lengths from the main menus. See the Equalize Net Lengths command for more information.
Options/Controls
- Style - specify the corner style for the tracks. Options include
90 Degrees,45 Degrees, andRounded. - Gap - specify the gap between two adjacent tracks.
- Amplitude - specify the tuning amplitude when equalizing nets.