Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 5
543.23.13.02.12.0
Close
検索 Search on Documentation
Documentation Altium NEXUS Home ... ((Dialog Reference))_AD Dialogs((G to L))_AD

PCB_Dlg-Altium_PCB_Common_DocumentViews_BoardConfiguration_Views_LayerEditorDialogLayer(s) Editor_AD

Created: 11月 19, 2019 | Updated: 11月 19, 2019 | Applies to versions: 3.0, 3.1, 3.2, 4 and 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

   

Two variations of the Layer Editor dialog

Summary

The Layer(s) Editor dialog provides controls to add or edit a mechanical layer or add or edit a component layer pair through the View Configuration panel.

Access

The dialog is accessed in a PCB document from the View Configuration panel (View » Panels » View Configuration) in the following ways:

  • To add or edit a mechanical layer (image on the left), right-click in the Layers region on the Layers & Colors tab of the panel then select Add Mechanical Layer.
  • To add or edit a component layer pair (image on the right), right-click in the Layers region on the Layers & Colors tab of the panel then select Add Component Layer Pair.

Options/Controls

  • Layer Name/Layer Pair Name - enter or edit the layer or layer pair name.
  • Layer Number - enter the desired layer number or use the up/down arrows to select.
This field is available only when adding/editing a mechanical layer.
  • Layer Number
    • Top/Bottom - enter the desired top and bottom layer numbers or use the up/down arrows to select.
This field is available only when adding/editing a component layer pair.
  • Layer Type - use the drop-down to select the type of layer.  
For more information regarding this dialog, visit the Working with Mechanical Layers page.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.