Parent page: Schematic Commands
The following pre-packaged resources, derived from this base command, are available:
Applied Parameters: None
This command is used to visually cycle forward through the available part numbers for a placed multi-part component.
This command is accessed from the Schematic Editor by choosing the Edit » Increment Part Number command from the main menus.
After launching the command, the cursor will change to a cross-hair and you will be prompted to choose a part. Position the cursor over the multi-part component whose part you wish to increment then click or press Enter. The symbol graphic (and designator) will change accordingly to display the next sequential part for that component.
Continue cycling through part numbers for the same or other multi-part components, or right-click or press Esc to exit part increment mode.
Applied Parameters: ContextSensitive=True
This command is used to visually cycle to the next available part number for the multi-part component currently under the cursor.
This feature is accessed from the Schematic Editor by right-clicking over a placed multi-part component then choosing the Part Actions » Increment Part Number command from the context menu.
First, ensure that the cursor is placed over the multi-part component whose part you wish to increment.
After launching the command, the symbol graphic (and designator) will change accordingly to display the next sequential part for that component.
利用できる機能は、Altium 製品のアクセスレベルによって異なります。Altium Designer ソフトウェア サブスクリプション の様々なレベルに含まれる機能と、Altium 365 プラットフォーム で提供されるアプリケーションを通じて提供される機能を比較してください。
ソフトウェアの機能が見つからない場合は、Altium の営業担当者に連絡して 詳細を確認してください。