Parent page: Schematic Commands
The following pre-packaged resources, derived from this base command, are available:
Applied Parameters: Action=Dialog
This command is used to access the Align Objects dialog, which provides controls for quickly aligning the set of currently selected design objects as required.
This command can be accessed from the Schematic Editor, and Schematic Library Editor, by:
First, ensure that all objects you wish to involve in the alignment are selected in the main design workspace.
After launching the command, the Align Objects dialog will appear. Use the dialog to set options for both the vertical and/or horizontal alignment of the selected objects, as required, then click OK to effect alignment.
Applied Parameters: Action=Left
This command enables you to align selected design objects by their left edges.
After launching the command, the left edge of the left-most object is used as a reference, and all other objects in the selection will be moved left, so that their left edges are aligned with this reference.
Applied Parameters: Action=Right
This command enables you to align selected design objects by their right edges.
After launching the command, the right edge of the right-most object is used as a reference, and all other objects in the selection will be moved right, so that their right edges are aligned with this reference.
Applied Parameters: Action=Top
This command enables you to align selected design objects by their top edges.
After launching the command, the top edge of the top-most object is used as a reference, and all other objects in the selection will be moved up, so that their top edges are aligned with this reference.
Applied Parameters: Action=Bottom
This command enables you to align selected design objects by their bottom edges.
After launching the command, the bottom edge of the bottom-most object is used as a reference, and all other objects in the selection will be moved down, so that their bottom edges are aligned with this reference.
Applied Parameters: Action=CenterHorizontal
This command enables you to place selected objects in a single column, aligned by their horizontal centers.
After launching the command, the objects in the selection will be moved horizontally to form a single column, aligned by their horizontal centers. The vertical center line for the column is the mid-point between the left-most and right-most objects in the selection.
Applied Parameters: Action=CenterVertical
This command enables you to place selected objects in a single row, aligned by their vertical centers.
After launching the command, the objects in the selection will be moved vertically to form a single row, aligned by their vertical centers. The horizontal center line for the row is the mid-point between the top-most and bottom-most objects in the selection.
Applied Parameters: Action=SpaceEquallyHorizontal
This command allows you to make the horizontal spacing of a selection of objects equal.
First, ensure that all objects you wish to involve in the spacing command are selected in the main design workspace.
After launching the command, the left-most and right-most objects in the selection will remain fixed in their positions, with all other objects spaced equally between them. The vertical position of the objects is not changed.
Applied Parameters: Action=SpaceEquallyVertical
This command allows you to make the vertical spacing of a selection of objects equal.
After launching the command, the top-most and bottom-most objects in the selection will remain fixed in their positions, with all other objects spaced equally between them. The horizontal position of the objects is not changed.
Applied Parameters: Action=Grid
This command is used to move selected objects to the nearest point on the current snap grid.
First, ensure that all objects you wish to move to the current snap grid are selected. Also, make sure the snap grid has been set up as required.
After launching the command, the objects will be moved to the nearest point on the snap grid.
Applied Parameters: ContextSensitive=True|Action=Dialog
With two or more objects selected in the workspace, this command is accessed from the Schematic Editor by right-clicking (over an object or in free space) and choosing the Align » Align command, from the context menu.
Applied Parameters: ContextSensitive=True|Action=Left
With two or more objects selected in the workspace, this command can be accessed from the Schematic Editor by:
Applied Parameters: ContextSensitive=True|Action=Right
Applied Parameters: ContextSensitive=True|Action=Top
Applied Parameters: ContextSensitive=True|Action=Bottom
Applied Parameters: ContextSensitive=True|Action=CenterHorizontal
With two or more objects selected in the workspace, this command is accessed from the Schematic Editor by right-clicking (over an object or in free space) and choosing the Align » Align Horizontal Centers command, from the context menu.
Applied Parameters: ContextSensitive=True|Action=CenterVertical
With two or more objects selected in the workspace, this command is accessed from the Schematic Editor by right-clicking (over an object or in free space) and choosing the Align » Align Vertical Centers command, from the context menu.
Applied Parameters: ContextSensitive=True|Action=SpaceEquallyHorizontal
Applied Parameters: ContextSensitive=True|Action=SpaceEquallyVertical
Applied Parameters: ContextSensitive=True|Action=Grid
利用できる機能は、Altium 製品のアクセスレベルによって異なります。Altium Designer ソフトウェア サブスクリプション の様々なレベルに含まれる機能と、Altium 365 プラットフォーム で提供されるアプリケーションを通じて提供される機能を比較してください。
ソフトウェアの機能が見つからない場合は、Altium の営業担当者に連絡して 詳細を確認してください。