PinSwapper_Dlg-ConfigureAllPinSwapConfigure Swapping Information in Components_AD

現在、バージョン 19. をご覧頂いています。最新情報については、バージョン PinSwapper_Dlg-ConfigureAllPinSwap((Configure Swapping Information in Components))_AD の 21 をご覧ください。
 

The Configure Swapping Information In Components dialog
The Configure Swapping Information In Components dialog

Summary

The Configure Swapping Information in Components dialog lists all components used in the design (or library) with their current swap settings. 

To learn more, refer to Pin, Pair and Part Swapping.

Access

The dialog can be accessed in the following ways:

  • From the PCB editor, click Tools » Pin/Part Swapping » Configure
  • From the schematic or SCHLIB editor, click Tools » Configure Pin Swapping.

Options/Controls

  • Component Information - displays all relevant information about the listed components: Designator, Comment, Footprint, Library Reference, Pins, and Parts.
  • Configure in Schematic
    • Pin Swap Data - displays how many of the component's pins have been added to a pin-swap group.  For example, [3/2] means that 2 out of 3 pins have been added to a pin-swap group. The icon appears when a component has been modified to add pins to a pin-swap group. When a component has been modified to remove pins from the pin-swap group, the icon appears.

    • Part Swap Data - displays how many of the component's parts have been added to a part-swap group. For example, [3/2] means that 2 out of 3 parts have been added to a part-swap group. The icon appears when a component has been modified to add parts to a part-swap group. When a component has been modified to remove parts from the part-swap group, the icon appears.

  • Enable in PCB

    • Pin Swap - enable or disable pin swapping for each component by checking the box. The swap will take effect once you click OK and exit the dialog.

    • Part Swap - enable or disable part swapping for each component by checking the box. The swap will take effect once you click OK and exit the dialog.
If no check box is available, double-click the component to open the Pin Swapping for Component dialog and configure its pin/part swapping settings under the Pin Swapping and/or Part Swapping tabs. The component must have assigned pin/part swapping groups in order for pin/part swapping to be enabled.
  • Configure Component - click to open the Configure Pin Swapping For Component dialog to configure swap settings for the pins and subparts of each component on the board. 
  • Only Show Components with Swap Information - check to only display components that have been configured to enable pin and/or part swapping.

Right-Click Menu

This dialog includes a powerful right-click menu that makes it easy to quickly copy and paste the settings from one component to another or enable/disable multiple components in a single click. Select Configure Component from the right-click menu to open the Configure Pin Swapping for Component dialog for that component in which you can define the swap group settings for pins, differential pairs, and subparts. 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
注記

利用できる機能は、Altium 製品のアクセスレベルによって異なります。Altium Designer ソフトウェア サブスクリプション の様々なレベルに含まれる機能と、Altium 365 プラットフォーム で提供されるアプリケーションを通じて提供される機能を比較してください。

ソフトウェアの機能が見つからない場合は、Altium の営業担当者に連絡して 詳細を確認してください。

Content