PCB_Dlg-JumpToPadNumberJump To Pad Number_AD

Created: 1月 17, 2023 | Updated: 1月 17, 2023 | Applies to version: 22

This document is no longer available beyond version 22. Information can now be found here: Jumping to a Specific Point in a Document for version 25

注記

利用できる機能は、Altium 製品のアクセスレベルによって異なります。Altium Designer ソフトウェアサブスクリプションの様々なレベルに含まれる機能と、Altium 365 プラットフォームで提供されるアプリケーションを通じて提供される機能を比較してください。

ソフトウェアの機能が見つからない場合は、Altium の営業担当者に連絡して詳細を確認してください。

The Jump To Pad Number dialog The Jump To Pad Number dialog

Summary Copy Link Copied

This dialog allows you to quickly jump to a specific pad within the design workspace by specifying the pad's number.

If the target pad is already displayed within the main design window, the cursor will simply jump to the center of that pad. If the pad is out of view, the cursor will be positioned at the center of the pad, centered within the main design window (where possible).

Access Copy Link Copied

The dialog can be accessed from the PCB Editor by using the Edit » Jump » Pad command from the main menus.

You can also use the J, P keyboard sequence directly from within the focused workspace.

Options/Controls Copy Link Copied

Pad Number - use this field to specify the number of the pad you wish to jump to. To jump to the pad of a specific component, enter the identifier for the pad in the format <ComponentDesignator>-<PinDesignator> (e.g., U3-12).

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

印刷用ページ

注記

ソフトウェアの機能が見つからない場合は、Altium の営業担当者に連絡して詳細を確認してください。

PCB_Dlg-JumpToPadNumberJump To Pad Number_AD

Summary Copy Link Copied

Access Copy Link Copied

Options/Controls Copy Link Copied

Was this page helpful?