Altium Designer Home
...
((Dialog Reference))_AD
Dialogs((A to F))_AD
PCB_Dlg-ChooseObjectClassToRouteChoose Object Class to Route_AD
利用できる機能は、Altium 製品のアクセスレベルによって異なります。Altium Designer ソフトウェア サブスクリプション の様々なレベルに含まれる機能と、Altium 365 プラットフォーム で提供されるアプリケーションを通じて提供される機能を比較してください。
ソフトウェアの機能が見つからない場合は、Altium の営業担当者に連絡して 詳細を確認してください。
The Choose Object Class to Route dialog.
Summary Copy Link Copied
The designer can use this dialog to auto-route selected net classes or component classes.
Access Copy Link Copied
From the PCB editor, select AutoRoute » Net Class from the toolbar to access Choose Net Classes to Route dialog or select AutoRoute » Component Class to open the Choose Component Classes to Route dialog.
Options/Controls Copy Link Copied
Main Image List - Select a specific object class (such as a component class or net class) or multiple classes (by keeping the Ctrl key down and selecting classes of interest) and then specify the connections routing mode. Then the autorouter can attempt to route connections associated with these selected object classes.
In the Choose Component Classes to Route dialog, there's an additional Connections Routing Mode region where the designer can configure the routing end for component classes.
- One end is on a selected object - One of the routing ends is placed on the selected component.
- Both ends are on selected objects - Both routing ends are placed on the selected components.