Parameter Properties

Parent page: WorkspaceManager Dialogs

The Parameter Properties dialog

Summary

This dialog provides controls to specify the properties of a parameter when attached at the project or variant level. Parameters can be used to provide additional design information. Project-level parameters, for example, can be used in global fashion as the source for special string parameteric data to be added to schematic sheets and/or the PCB document - the latter of which does not support localized parameters.

Access

The Parameter Properties dialog can be accessed in the following ways:

• For a PCB project (*.PrjPcb), click the Add or Edit buttons on the Parameters tab of the Options for PCB Project dialog (Project | Content | from the Schematic or PCB editor's main menus).
• For a PCB project (*.PrjPcb), click the Add or Edit buttons in the Edit Project Variant dialog, which is accessed from the Variant Management dialog (Project | Project Actions| from the Schematic or PCB editor's main menus) when adding a new variant or editing an existing one.
• For an Integrated Library project (*.IntLib), click the Add or Edit buttons on the Parameters tab of the Options for Integrated Library dialog (accessed by right-clicking on the entry for the project in the Projects panel then choosing the Project Options command from the context menu).

Options/Controls

• Name - use this field to give the parameter a meaningful name reflective of its purpose.
• Value - use this field to give the parameter its value.