Search In: Doc:Documentation: Altium Designer
Altium DesignerAltium 365Altium MCAD CoDesignerAltium On-Prem Enterprise ServerAltium CircuitMakerAltium CircuitStudioCompany DashboardAltium Infrastructure Server
Ver: Version: 22
222120.220.120.019.119.018.1
Close
Search Search on Documentation
Documentation Altium Designer Documentation ... Dialog Reference S to Z

Snap Grid (1..1000) (Draftsman)

Created: June 09, 2022 | Updated: June 09, 2022 | Applies to version: 22

This document is no longer available beyond version 22. Information can now be found here: Set Grid Size for version 25

Note

The features available depend on your Altium product access level. Compare features included in the various levels of Altium Designer Software Subscription and functionality delivered through applications provided by the Altium 365 platform.

If you don’t see a discussed feature in your software, contact Altium Sales to find out more.

The Snap Grid (1..1000) (Draftsman) dialogThe Snap Grid (1..1000) (Draftsman) dialog

Summary Copy Link Copied

The Snap Grid (1..1000) dialog allows you to quickly set a different interval size for the Snap Grid for a Draftsman document (*.PCBDwf). The Snap Grid pulls the cursor to the nearest point on its defined grid. 

For a high-level look at how the Altium Draftsman Drawing System provides an interactive approach to the creation of production documentation for your PCBs, see Draftsman.

Access Copy Link Copied

The dialog can be accessed from the Draftsman editor in the following ways:

  • Click View » Set Grid Size from the main menus.
  • Use the G keyboard shortcut.

Options/Controls Copy Link Copied

Enter the grid interval as required.

The entered grid size is reflected at the left-hand side of the status bar.
If entering a snap grid setting without specifying units, the entry will be in the default measurement units selected for the design as determined by the Units setting in the Units region in the Document Options mode of the Properties panel. Specifying units when entering the value (mm or mil) in this dialog will change the default measurement units for the document if not currently the default.
English
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Printer-friendly version
Note

The features available depend on your Altium product access level. Compare features included in the various levels of Altium Designer Software Subscription and functionality delivered through applications provided by the Altium 365 platform.

If you don’t see a discussed feature in your software, contact Altium Sales to find out more.