Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 1.1
543.23.13.02.12.01.11.0
Close
Suche Search on Documentation
Documentation Altium NEXUS Documentation ... ((Dialog Reference))_AD Dialogs((A to F))_AD

Sch_Dlg-JumpComponentDialogComponent Designator (SCH) _AD

Created: Juli 28, 2015 | Updated: März 06, 2024 | Applies to versions: 1.0 and 1.1

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Component Designator dialogThe Component Designator dialog

Summary

This dialog allows you to jump to a specific component on a schematic sheet, targeted by its logical or physical designator.

Access

From the Schematic Editor, use the Edit » Jump » Jump Component command from the main menus.

Options/Controls

  • Designator Entry Field - enter the component designator string for the component you wish to jump to.
  • Physical - enable this option to confine the jump feature to only physical component designators, i.e. those appearing on the Compiled Document tabbed views of the source schematic documents after the project has been compiled. With this option disabled, the jump feature will only consider logical designators, i.e. those appearing on the Editor tabbed views of the source schematic documents.
The project must be compiled before physical designators can be used as the target for a jump.
For a multi-part component, just enter the core designator without part information (e.g. U2 and not U2A).

Tips

  • When a valid component designator is entered and the OK button clicked, the found component is zoomed and centered in the main design window. For a multi-part component, the first part will be highlighted with the Find Text - Jump dialog opened. Use this dialog to jump between sub-parts of the component.
  • The found component (or all parts for a multi-part component) is also listed in the Messages panel. Double-click a message entry to jump to that component (or part thereof) in the workspace.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.