Sch_Dlg-ChooseDocumentToPlaceChoose Document to Place_AD

Nexus message

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Choose Document to Place dialog

Summary

This dialog allows you to choose the target schematic document that is to be referenced by a newly-created sheet symbol when using the Create Sheet Symbol From Sheet command.

Ensure the sheet that is to include the sheet symbol is the active document before accessing this dialog.

Access

The dialog is accessed from the schematic editor in the following ways:

  • Click Design » Create Sheet Symbol From Sheet from the main menus.
  • Right-click in the design workspace away from any design objects then click Sheet Actions » Create Sheet Symbol From Sheet.

Options/Controls

The main area of the dialog lists all candidate schematic documents for the project, that legitimately can be used as the target reference sub-sheet for the new sheet symbol. Each document is listed in terms of its name and path to the folder in which it resides. Click on an entry to select the required document.

As the sheet symbol is created and placed on the active sheet, this sheet will not be listed. This is because a sheet symbol cannot reference the same sheet on which it is itself placed.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.