Sch_Dlg-ChooseDocumentToReferenceChoose Document to Reference_AD

Nexus message

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Choose Document to Reference dialog

Summary

This dialog allows you to choose the target schematic document that is to be referenced by the sheet symbol whose properties are currently being defined.

Access

The dialog is accessed from the Properties panel in Sheet Symbol mode by clicking ... to the right of the File Name field in the Source region.

Options/Controls

The main area of the dialog lists all candidate schematic documents for the project that can be used as the target reference sub-sheet for the sheet symbol. Each valid document's name and path to the folder in which it resides is listed.

Click on an entry to select the required document.

The sheet on which the sheet symbol is placed will not be listed. This is because a sheet symbol cannot reference the same sheet on which it is already placed.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.