Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 1.0
543.23.13.02.12.01.11.0
Close
Suche Search on Documentation
Documentation Altium NEXUS Documentation ... ((Dialog Reference))_AD Dialogs((A to F))_AD

PCB_Dlg-ZPositionFormChoose Height Above Board Top Surface_AD

Created: Juni 07, 2017 | Updated: März 06, 2024 | Applies to versions: 1.0 and 1.1

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Choose Height Above Board Top Surface dialogThe Choose Height Above Board Top Surface dialog

Summary

This dialog allows you to specify the height of a nominated point on a chosen 3D Body, relative to the top surface of the board.

Access

This dialog is accessed in 3D Layout Mode from the PCB or PCB Library editor by clicking Tools » 3D Body Placement » Set Body Height from the main menus then double-clicking on the placed 3D Body.

The current viewing mode can be changed using the corresponding commands from the main View menu. 

Options/Controls

  • Original - the current value for the height of the nominated point on the chosen 3D model, in relation to the board's top surface.
  • Board Surface - enable this option to have the nominated point on the chosen 3D model flush with the top surface of the board (0 height).
  • Custom - enable this option to specify a custom height for the nominated point on the chosen 3D model above (positive value), or below (negative value), the board's top surface.

 


If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.