Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium On-Prem Enterprise ServerAltium CircuitMakerAltium CircuitStudioCompany DashboardAltium Infrastructure Server
Ver: Version: 1.0
543.23.13.02.12.01.11.0
Close
Suche Search on Documentation
Documentation Altium NEXUS Documentation ... ((Dialog Reference))_AD Dialogs((A to F))_AD

PCB_Dlg-PriorityEditor_FormEdit Rule Priorities_AD

Created: Oktober 27, 2017 | Updated: März 06, 2024 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5
Now reading version 1.0. For the latest, read: PCB_Dlg-PriorityEditor_Form((Edit Rule Priorities))_AD for version 5

Nexus message

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Edit Rule Priorities dialog
The Edit Rule Priorities dialog

Summary

The Edit Rule Priorities dialog provides controls to manage the priority of rules within a chosen rule category. It is the rule priority that defines the order in which multiple rules of the same type are applied when, for example, performing a Design Rule Check. Rule priority simplifies the process of defining and managing rules, the idea being to define general rules that cover broad requirements and then override these with specific rules in specific situations.

The situation may be that a design object is covered by more than one rule with the same scope. In this instance, a contention exists. All contentions are resolved by the priority setting. The system goes through the rules from highest to lowest priority and picks the first one whose scope expression(s) match the object(s) being checked.

Access

The dialog is accessed from the PCB Editor by clicking the Priorities button at the bottom of the PCB Rules and Constraints Editor dialog (click Design » Rules) .

Options/Controls

  • Rule Type - use the drop-down to choose the specific rule type of which you want to manage the defined rules priorities. Note that all rule types are listed, regardless of whether or not rules of a particular type actually exist.
Initially, the dialog will list all rule instances for the rule type that is currently selected in the PCB Rules and Constraints Editor dialog.
  • Priority Listing - lists all currently defined rules of the chosen type. Rules are listed in order of priority, with the highest priority (1) at the top of the list. For each rule, the following read-only information is available:
    • Priority - a number representing the rule's current priority. The smaller the number, the higher the priority, with 1 being the highest priority.
    • Enabled - reflects whether the rule is currently enabled (box checked) or disabled (box unchecked).
    • Name - the name of the rule.
    • Scope - the scope of the rule. This entry shows the logical query expression (unary rule) or expressions (binary rule) used to target the required objects in the design.
    • Attributes - the constraints for the rule along with their defined values.
  • Increase Priority - click to increase the priority of the selected design rule (where applicable).
  • Decrease Priority - click to decrease the priority of the selected design rule (where applicable).

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.