Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 1.0
543.23.13.02.12.01.11.0
Close
Suche Search on Documentation
Documentation Altium NEXUS Documentation ... ((Dialog Reference))_AD Dialogs((A to F))_AD

PCB_Dlg-ArrangeRoomsArrange Rooms_AD

Created: Mai 25, 2017 | Updated: Februar 22, 2018 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5
Now reading version 1.0. For the latest, read: PCB_Dlg-ArrangeRooms((Arrange Rooms))_AD for version 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Arrange Rooms dialog
The Arrange Rooms dialog

Summary

The Arrange Rooms dialog allows you to easily arrange the locations of Rooms.

Access

Select the Rooms you want arrange then click Design » Rooms » Arrange Rooms. 

Options/Controls

Columns/Rows

  • Columns - displays the current number of columns used to place the rooms. Edit this field to change the number of columns.
  • Rows - displays the current number of rows used to place the rooms. Edit this field to change the number of rows.

If there are more rooms than will fit into the custom rows and columns arrangement, more rows will be added at the top.

SortBy

  • SortBy - displays the current sort order, i.e., the criteria used to distinguish the first room from the next, and so on. Click to view and select a sort criteria from the list. The available options are:
    • Channel Name - sorts the rooms alpha-numerically by their name.
    • Room Area - sorts the rooms by their area.
    • Room Component Count - sorts the rooms by the number of components they contain.
    • Room Width - sorts the rooms by their X (horizontal) size.

    • Room Height - sorts the rooms by their Y (vertical) size.

The default for sorting is biggest first. Using names, closest to Z is first.
  • Sort in Ascending order - enable to sort the rooms in ascending (smallest to largest) order according to the SortBy criteria.

Position

  • Origin X - displays the current X (horizontal) coordinate in relation to the origin from where to start placing the rooms. Edit this field to change the X coordinate, which can be defined in either mm or mil units. To specify the units when entering a number, add the mm or mil suffix to the value. Default units (metric or imperial) are determined by the Units setting in the Properties panel and are used if no units are specified.

  • Origin Y - displays the current Y (vertical) coordinate in relation to the origin from where to start placing the rooms. Edit this field to change the Y coordinate, which can be defined in either mm or mil units. To specify the units when entering a number, add the mm or mil suffix to the value. Default units (metric or imperial) are determined by the Units setting in the Properties panel and are used if no units are specified.

    The Select Origin Using Mouse option must be disabled in order to edit Origin X and Origin Y.

  • Select Origin Using Mouse - enable to manually set the origin for the room arrangement using the cursor.
  • X-Spacing - displays the current X (horizontal) distance to leave between adjacent rooms. Edit this field to change the distance, which can be defined in either mm or mil units. To specify the units when entering a number, add the mm or mil suffix to the value. Default units (metric or imperial) are determined by the Units setting in the Properties panel and are used if no units are specified.

  • Y-Spacing - displays the current Y (vertical) distance to leave between adjacent rooms. Edit this field to change the distance, which can be defined in either mm or mil units. To specify the units when entering a number, add the mm or mil suffix to the value. Default units (metric or imperial) are determined by the Units setting in the Properties panel and are used if no units are specified.

    The Auto Spacing option must be disabled in order to edit X-Spacing and Y-Spacing.

  • Auto Spacing - enable to have the rooms arranged with equal X (horizontal) and Y (vertical) spacing.
  • Place On Grid - enable to force the rooms to arrange in alignment with the PCB document grid.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Content