Parent page: Schematic Commands
The following pre-packaged resource, derived from this base command, is available:
Place Graphical Image
Applied Parameters: None
Summary
This command is used to place an Image object onto the active document. An image object is a non-electrical drawing primitive. It is essentially a container for an image file that can be imported and placed onto a schematic sheet. The image associated with an image object can either be linked or embedded.
For detailed information about this object type, see
Image.
Access
Image objects are available for placement in both Schematic and Schematic Library Editors:
- Schematic Editor - the following commands are available:
- Choose Place » Drawing Tools » Graphic from the main menus.
- Click the button on the Utility Tools drop-down () of the Utilities toolbar.
- Right-click and choose Place » Drawing Tools » Graphic from the context menu.
- Schematic Library Editor - the following commands are available:
- Choose Place » Graphic from the main menus.
- Click the button on the Utility Tools drop-down () of the Utilities toolbar.
- Right-click and choose Place » Graphic from the context menu.
Use
After launching the command, the cursor will change to a cross-hair and you will enter image placement mode. Placement is made by performing the following sequence of actions:
- Position the cursor and click or press Enter to anchor the first corner of the image's frame, in which the image itself will reside.
- Move the cursor to adjust the size of the frame and click or press Enter to complete frame placement.
- The Open dialog will appear, from where you can browse to and select the required image. Select the file you wish to insert and press the Open button to complete image placement.
- Continue placing further image objects, or right-click or press Esc to exit placement mode.
Additional actions that can be performed during placement – while the image's frame is still floating on the cursor, and before its first corner is anchored – are:
- Press the Tab key to access the Graphic dialog, from where properties for the image can be changed on-the-fly.
- Press the Alt key to constrain the direction of movement to the horizontal or vertical axis, depending on the initial direction of movement.
- Press the Spacebar to rotate the image frame anti-clockwise or Shift+Spacebar for clockwise rotation. Rotation is in steps of 90°.
- Press the X or Y keys to mirror the image frame along the X-axis or Y-axis respectively.
Tips
- The following image formats are supported:
.bmp
, .dcx
, .dib
, .emf, .jpg
, .pcx
, .png
, .rle
, .svg, .tga
, .wmf
.
- To retain the image's original aspect ratio, ensure that the X:Y Ratio 1:1 option is enabled in the Graphic dialog. When this option is enabled, the image will be scaled to fit optimally into the frame size specified while maintaining the original aspect ratio of the image. If the option is disabled, the image is stretched to fit exactly into the drawn frame size.
- A copy of a placed image will only be stored inside the schematic sheet if the corresponding Embedded option is enabled in the Graphic dialog. If this option is disabled, only a link to the image file will be stored. Care should be taken when using linked images – if the location of the image changes, you will need to update the link accordingly, using the FileName field in the Graphic dialog.
- For information on how a placed image object can be modified graphically, directly in the workspace, see Graphical Editing.
- While attributes can be modified during placement (Tab to bring up associated properties dialog), bear in mind that these will become the default settings for further placement unless the Permanent option on the Schematic – Default Primitives page of the Preferences dialog is enabled. When this option is enabled, changes made will affect only the object being placed and subsequent objects placed during the same placement session.