PCB_Cmd-ReportBoardSpecsReportBoardSpecs_AD

Created: Juli 27, 2015 | Updated: August 01, 2018 | Applies to versions: 15.1, 16.0, 16.1, 17.0, 17.1, 18.0, 18.1, 19.0 and 19.1

Now reading version 16.1. For the latest, read: PCB_Cmd-ReportBoardSpecs((ReportBoardSpecs))_AD for version 22

Parent page: PCB Commands

The following pre-packaged resources, derived from this base command, are available:

Component Report

Applied Parameters: ReportKind=Component

Summary

This command is used to generate a report for the active PCB 2D/3D Component model in the current PCB Library document.

Access

This command is accessed from the PCB Library Editor by choosing the Reports » Component command from the main menus.

Use

After launching the command, the report will be generated (<PCBLibraryDocumentName>.CMP) in the same folder as the source PCB library document and will automatically be opened as the active document in the main design window. The report lists information including footprint dimensions and a breakdown of the primitive objects that constitute the footprint and the layers on which they reside.

Tips

The report will be added to the Projects panel as a free document under the Documentation\Text Documents sub-folder.

Library Report

Applied Parameters: ReportKind=Library

Summary

This command is used to generate a report listing all PCB 2D/3D Component models in the current PCB Library document.

Access

This command is accessed from the PCB Library Editor by choosing the Reports » Library List command from the main menus.

Use

After launching the command, the report will be generated (<PCBLibraryDocumentName>.REP) in the same folder as the source PCB Library document and will automatically be opened as the active document in the main design window. The report summarizes the total number of component models in the library and lists all of the component models by name.

Tips

The report will be added to the Projects panel as a free document under the Documentation\Text Documents sub-folder.

Druckversion

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

PCB_Cmd-ReportBoardSpecsReportBoardSpecs_AD

Summary

Access

Use

Tips

Summary

Access

Use

Tips

Was this page helpful?