Parent page: PCB Commands
The following pre-packaged resources, derived from this base command, are available:
Place Component
Applied Parameters: None
Summary
This command is used to place a PCB 2D/3D Component model, from any of the Available Libraries, onto the current document. A PCB 2D/3D Component model is the representation of a physical device on a PCB. It includes a 2D footprint (with such items as pads for connecting to the pins of a device, a physical outline of the package and device mounting features), and any 3D information (through the association of one or more 3D Bodies).
For detailed information about this object type, see
Component.
Access
This command can be accessed from the PCB Editor by:
- Choosing the Place » Component command from the main menus.
- Clicking the button on the Wiring toolbar.
Use
After launching the command, the Place Component dialog will appear. Use the dialog to choose the required PCB 2D/3D Component model. Two placement methods are supported:
- Footprint - search for a PCB 2D/3D Component model. You can enter the name for the model directly, or search for the required model across all available libraries (PcbLibs and IntLibs) using the Browse Libraries dialog.
- Component - search for a schematic component, and then use the PCB 2D/3D Component model linked to that component (or choose the model if multiple are defined). You can enter the logical symbol name for the schematic component directly, or search for the required schematic component across all available libraries (SchLibs and IntLibs) using the Browse Libraries dialog.
The
Browse Libraries dialog allows you to browse through the currently Available Libraries (project libraries, installed libraries and libraries found along search paths defined on the
Search Paths tab of the
Options for Project dialog). The
Browse Libraries dialog also provides a search facility - allowing you to search for a specific component/model across all Available Libraries, or in any library along an external search path.
Once the required 2D/3D Component model has been chosen, set the appropriate designator and any comment text. Proceed with placement as follows:
- Click OK - you will return to the PCB document and an outline of the component will be floating on the cursor.
- Position the component and click, or press Enter, to place it.
- Continue placing further instances of the same component, or right-click, or press Esc, to exit.
- The Place Component dialog will reappear. Either browse for a different component to place, or click Cancel to exit component placement mode.
Additional actions that can be performed during placement – while the component is still floating on the cursor – are:
- Press the Tab key to access the Component dialog, from where properties for the component can be changed on-the-fly.
- Press the Alt key to constrain the direction of movement to the horizontal or vertical axis, depending on the initial direction of movement.
- Press the Spacebar to rotate the component anti-clockwise or Shift+Spacebar for clockwise rotation. Rotation is in accordance with the value for the Rotation Step, defined on the PCB Editor – General page of the Preferences dialog..
- Press the L key to flip the component to the other side of the board.
- Press the X or Y keys to mirror the component along the X-axis or Y-axis respectively (on the same side of the board).
Tips
- An alternate method of component placement is to use the Libraries panel. The panel offers advanced search functions, and the ability to drag and drop a component from the panel, directly onto the active PCB document. If clicking the Place button in the panel, the Place Component dialog will appear - loaded with the selected footprint in the panel. Placement proceeds as if using this Place Component command.
- The designator is auto-incremented as you place further instances of the same component footprint type. It is therefore advisable to set the designator to that required, before commencing placement of the first instance.
- While attributes can be modified during placement (Tab to bring up associated properties dialog), bear in mind that these will become the default settings for further placement unless the Permanent option on the PCB Editor – Defaults page of the Preferences dialog is enabled. When this option is enabled, changes made will affect only the object being placed and subsequent objects placed during the same placement session.