系统要求

Created: 四月 12, 2022 | Updated: 四月 12, 2022 | Applies to version: 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Ensure that your computer/server meets the system requirements detailed below, prior to installing Altium software.

Altium NEXUS

Below are the recommended and minimum system requirements to install and run Altium NEXUS.

Recommended System Requirements

Windows 11 (64-bit only) or Windows 10 (64-bit only)

Windows 8.1 (64-bit only) and Windows 7 SP1 (64-bit only) are still supported, although not recommended.

Intel® Core™ i7 processor or equivalent
16GB RAM
10GB hard disk space (Install + User Files)
SSD
High performance graphics card (supporting DirectX 10 or better), such as GeForce GTX 1060/Radeon RX 470
Dual monitors with 2560x1440 (or better) screen resolution
3D mouse for 3D PCB design, such as the SpaceMouse^®
Adobe® Reader® (version XI or later for 3D PDF viewing)
Internet Connection
Up to date Web browser
Microsoft Office 32-bit or 64-bit (Microsoft Excel required for BOM, Microsoft Access required for DbLibs). 64-bit Microsoft Access Database Engine 2010 (required for DbLibs) - this is included in Microsoft Office 64-bit, but not included in Microsoft Office 32-bit). If you are running 32-bit and 64-bit versions of Altium Design software, see Using Database Libraries with 32-bit and 64-bit Altium Design Software on the same Computer.

Some keyboard shortcuts that are used within the software require a numeric keypad.

Minimum System Requirements

Windows 10 (64-bit only) or Windows 8.1 (64-bit only)

Windows 7 SP1 (64-bit only) is still supported, although not recommended.

Intel® Core™ i5 processor or equivalent
4GB RAM
10GB hard disk space (Install + User Files)
Graphics card (supporting DirectX 10 or better), such as GeForce 200 series/Radeon HD 5000 series/Intel HD 4600
Monitor with at least 1680x1050 (widescreen) or 1600x1200 (4:3) screen resolution
Adobe® Reader® (version XI or later for 3D PDF viewing)
Up to date Web browser
Microsoft Office 32-bit or 64-bit (Microsoft Excel required for BOM, Microsoft Access required for DbLibs). 64-bit Microsoft Access Database Engine 2010 (required for DbLibs) - this is included in Microsoft Office 64-bit, but not included in Microsoft Office 32-bit). If you are running 32-bit and 64-bit versions of Altium Design software, see Using Database Libraries with 32-bit and 64-bit Altium Design Software on the same Computer.

Some keyboard shortcuts that are used within the software require a numeric keypad.

.NET Framework

.NET Framework 4.8 is installed (if not currently available) on the target machine as part of installation of Altium NEXUS.

DPI Scaling Support

The following table shows the maximum DPI Scaling supported, based on the vertical resolution of the monitor being used.

Monitor Vertical Resolution (pixels)	Maximum DPI Scaling Supported
1024 to 1200	100%
1600	125%
1800	200%
2K and above	250%

When using multiple monitors, note that Altium NEXUS does not support different DPI Scaling values set for different monitors. For all UI elements, the DPI Scaling of the main monitor will be used.

Other Considerations

The Size of the Design

The system requirements detailed above are for a medium-sized PCB design, for example up to 1000 components and up to 1000 nets. If your designs have a larger number of components and/or nets, then consider upgrading the processor family (for example, upgrade an i5 to an i7).

The Importance of a Good Graphics Card

Graphics cards are a critical hardware element that can have a large impact on both the performance and stability of systems. Choose the right hardware requirements necessary to achieve stunning results, make the whole system more responsive and ‘feel’ better, and remove distractions to design caused by lags in the GUI. This version of Altium NEXUS has been optimized for use with DirectX 10, and requires a graphics card that supports this. Altium has chosen DirectX rather than OpenGL for its graphics engine, which has become the preferred standard for gaming graphics cards. An advantage of this choice is the fact that gaming cards are often significantly less expensive than workstation cards of equivalent performance. We therefore strongly recommend the use of a gaming card instead of a workstation card.

The need for a high-performance graphics card is directly related to the amount of use of the 3D PCB capabilities. For example, a Core i7 processor with on-chip integrated HD4000 graphics will be more than adequate if you only require occasional use of the 3D PCB capabilities. If you intend to make extensive use of the 3D PCB features, for computationally intensive tasks such as 3D video or interactive presentations, then it is recommended to use a high performance gaming graphics card in combination with a 3D mouse, such as the SpaceMouse^®.

The key parameter of a Graphical Processing Unit (GPU) for higher performance in Altium NEXUS is its processing power in terms of floating point operations per second (FLOPS). It is not recommended to use GPUs with a performance lower than 700 GFLOPS. Above this level, performance grows proportionally. By way of example, one of the recommended graphics cards - the Radeon RX 470 - posesses a GPU whose performance is 3793 GFLOPS.

Altium Design File Storage

Due to some issues related to file systems for Linux, it is not recommended Linux as a file server to store Altium design files.

适合打印版本

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.