原理图API功能

Created: 六月 06, 2016 | Updated: 九月 26, 2016 | Applies to versions: 3.1, 3.2, 4 and 5

Nexus message

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: Technical Reference - Schematic API

Please note that this documentation was last updated for an older version of Altium NEXUS. While many of the principles and approaches will remain the same, be aware that interfaces, objects, methods, properties, and the like will have changed since then, and will not reflect the entirety of those found in later versions of the software.

Schematic API: Functions Reference

The Schematic API Functions reference includes the following content:

SchServer Interface
General functions
Measurement Conversion functions
Conversion functions

SchServer Interface

Function SchServer : ISch_ServerInterface;

Description
The SchServer function returns the interface of the loaded Schematic Editor module in Altium NEXUS. To work with Schematic objects, you need to have access to the ISch_ServerInterface interface first. To obtain the current schematic document, invoke the SchServer.GetCurrentSchDocument for instance.

Refer to the ISch_ServerInterface’s methods and properties for more information.

Example 1

    // Grab current schematic document.
    SchDoc := SchServer.GetCurrentSchDocument;
    If SchDoc = Nil Then Exit;
 
    // Component is a container that has child objects
    // Create component, and its rectangle, pin and parameter objects.
    Component := SchServer.SchObjectFactory (eSchComponent, eCreate_Default);

Example 2

   Try
       SchServer.ProcessControl.PreProcess(SchDoc, '');
 
       // Add the parameter to the pin with undo stack also enabled
       Param.Name := 'Added Parameter';
       Param.Text := 'Param added to the pin. Press Undo and this will disappear.  Press undo twice to remove the component';
       Param.Location := Point(InchesToCoord(3), InchesToCoord(2.4));
 
       Pin.AddSchObject(Param);
       SchServer.RobotManager.SendMessage(Component.I_ObjectAddress, c_BroadCast, SCHM_PrimitiveRegistration, Param.I_ObjectAddress);
   Finally
       SchServer.ProcessControl.PostProcess(SchDoc, '');
   End;

See also
ISch_ServerInterface interface

General functions

AlignToGridClosest

Function AlignToGridClosest (AValue : TCoord; AGridSize : TCoord) : TCoord;

AlignToGridDecrease

Function AlignToGridDecrease (AValue : TCoord; AGridSize : TCoord) : TCoord;

AlignToGridIncrease

Function AlignToGridIncrease (AValue : TCoord;
AGridSize : TCoord) : TCoord;

GetState_AllImplementations

Function GetState_AllImplementations (Const ASchComponent : ISch_Component) : TList;

GetState_PinsForCurrentMode

Function GetState_PinsForCurrentMode (Const ASchComponent : ISch_Component) : TList;

GetState_AllPins

Function GetState_AllPins (Const ASchComponent : ISch_Component) : TList;

GetState_AllParameters

Function GetState_AllParameters (Const ASchObject : ISch_BasicContainer) : TList;

HitTestResultToCursor

Function HitTestResultToCursor(T : THitTestResult): TCursor;

GetDefaultSchSheetStyle

Function GetDefaultSchSheetStyle : TSheetStyle;

GetWholeAndFractionalPart_DXP2004SP2_To_DXP2004SP1

Procedure GetWholeAndFractionalPart_DXP2004SP2_To_DXP2004SP1(ACoord : TCoord; Var AWholePart, AFractionalPart : Integer);

GetCoord_DXP2004SP1_To_DXP2004SP2

Function GetCoord_DXP2004SP1_To_DXP2004SP2(AWholePart, AFractionalPart : Integer) : TCoord;

ConvertFileName_99SEToDXP2004

Function ConvertFileName_99SEToDXP2004(Const AOriginalName, ADocKind : TDynamicString) : TDynamicString;

GetResolvedSheetFileName

Function GetResolvedSheetFileName(Const AOriginalSFN : TDynamicString; Const AProject : IProject) : TDynamicString;

Sch_GetOwnerProject

Function Sch_GetOwnerProject(Const AContainer : ISch_BasicContainer) : IProject;

Measurement Conversion functions

//Imperial functions
Function CoordToMils        (    C : TCoord) : TReal;
Function CoordToDxps        (    C : TCoord) : TReal;
Function CoordToInches      (    C : TCoord) : TReal;
Function MilsToCoord        (    M : TReal) : TCoord;
Function DxpsToCoord        (    M : TReal) : TCoord;
Function InchesToCoord      (    M : TReal) : TCoord;

//Metric functions
Function CoordToMMs         (    C : TCoord) : TReal;
Function CoordToCMs         (    C : TCoord) : TReal;
Function CoordToMs          (    C : TCoord) : TReal;
Function MMsToCoord         (    M : TReal) : TCoord;
Function CMsToCoord         (    M : TReal) : TCoord;
Function   MsToCoord         (    M : TReal) : TCoord;

Function MetricString(Var S : TDynamicString; DefaultUnits : TUnit) : Boolean;
Function ImperialString(Var S : TDynamicString; DefaultUnits : TUnit) : Boolean;

Function CoordUnitToString       (C : TCoord; U : TUnit) : TDynamicString;

Function CoordUnitToStringWithAccuracy (ACoord         : TCoord;
                                          AUnit          : TUnit;
                                          ARounding      : Integer;
                                          AFixedDecimals : Integer) : TDynamicString;

Function ExtractValueAndUnitFromString(AInString : TDynamicString;
                                        ADefaultUnit : TUnit;
                                    Var AValue       : TDynamicString;
                                    Var AUnit        : TUnit) : Boolean;

Function StringToCoordUnit       (S : TDynamicString; Var C : TCoord; ADefaultUnit : TUnit) : Boolean;

Function CoordUnitToString       (C : TCoord; U : TUnit) : TDynamicString;

Function CoordUnitToStringFixedDecimals (C : TCoord; U : TUnit; AFixedDecimals : Integer) : TDynamicString;

Function CoordUnitToStringNoUnit (C : TCoord; U : TUnit) : TDynamicString;
Function CoordUnitToStringWithAccuracy (ACoord         : TCoord;
                                          AUnit          : TUnit;
                                          ARounding      : Integer;
                                          AFixedDecimals : Integer) : TDynamicString;

Function GetDisplayStringFromLocation(ALocation : TLocation; AUnit : TUnit) : TDynamicString;

Function GetCurrentDocumentUnit : TUnit;
Function GetCurrentDocumentUnitSystem : TUnitSystem;
Function GetSchObjectOwnerDocumentUnit(Const AObject : ISch_BasicContainer) : TUnit;

Conversion functions

Function GetStateString_ObjectId                 (N : TObjectId                 ) : TString;
Function GetStateString_HorizontalAlign          (N : THorizontalAlign          ) : TString;
Function GetStateString_IeeeSymbol               (N : TIeeeSymbol               ) : TString;
Function GetStateString_LeftRightSide            (N : TLeftRightSide            ) : TString;
Function GetStateString_LineStyle                (N : TLineStyle                ) : TString;
Function GetStateString_PinElectrical            (N : TPinElectrical            ) : TString;
Function GetStateString_PortArrowStyle           (N : TPortArrowStyle           ) : TString;
Function GetStateString_PortIO                   (N : TPortIO                   ) : TString;
Function GetStateString_PowerObjectStyle         (N : TPowerObjectStyle         ) : TString;
Function GetStateString_CrossSheetConnectorStyle (N : TCrossSheetConnectorStyle ) : TString;
Function GetStateString_RotationBy90             (N : TRotationBy90             ) : TString;
Function GetStateString_Justification            (N : TTextJustification        ) : TString;
Function GetStateString_HorizontalJustification (N : TTextJustification        ) : TString;
Function GetStateString_VerticalJustification    (N : TTextJustification        ) : TString;
Function GetStateString_SheetStyle               (N : TSheetStyle               ) : TString;
Function GetStateString_Size                     (N : TSize                     ) : TString;
Function GetStateString_Location                 (N : TLocation                 ) : TString;
Function GetStateString_DisplayMode              (N : TDisplayMode              ) : TString;

Function GetStateString_LineShape    (N : TLineShape) : TString;
Function GetStateString_ObjectIdPlural(N : TObjectId) : TString;

Justification functions

Function IsJustified_Left    (N : TTextJustification) : Boolean;
Function IsJustified_HCenter (N : TTextJustification) : Boolean;
Function IsJustified_Right   (N : TTextJustification) : Boolean;
Function IsJustified_Bottom (N : TTextJustification) : Boolean;
Function IsJustified_VCenter (N : TTextJustification) : Boolean;
Function IsJustified_Top     (N : TTextJustification) : Boolean;
Procedure GetOrdinalValueFromHorizontalJustification(J : TTextJustification;Var I : Integer);
Procedure GetOrdinalValueFromVerticalJustification (J : TTextJustification;Var I : Integer);
Procedure GetHorizontalJustificationFromOrdinalValue(I : Integer; Var J : TTextJustification);
Procedure GetVerticalJustificationFromOrdinalValue (I : Integer; Var J : TTextJustification);

适合打印版本

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.