Sch_Dlg-ChooseDocumentToPlaceChoose Document to Place_AD
Created: 二月 06, 2019 | Updated: 二月 06, 2019
| Applies to versions: 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5
您正在阅读的是 3.0. 版本。关于最新版本,请前往 Sch_Dlg-ChooseDocumentToPlace((Choose Document to Place))_AD 阅读 5 版本
The Choose Document to Place dialog
Summary
This dialog allows you to choose the target schematic document that is to be referenced by a newly-created sheet symbol when using the Create Sheet Symbol From Sheet command.
Access
The dialog is accessed from the schematic editor in the following ways:
- Click Design » Create Sheet Symbol From Sheet from the main menus.
- Right-click in the design workspace away from any design objects then click Sheet Actions » Create Sheet Symbol From Sheet.
Options/Controls
The main area of the dialog lists all candidate schematic documents for the project that legitimately can be used as the target reference sub-sheet for the new sheet symbol. Each document is listed in terms of its name and path to the folder in which it resides. Click on an entry to select the required document.