PcbDrawing_Cmd-ToggleSelectionToggleSelection_AD

Created: 十月 12, 2018 | Updated: 二月 20, 2019 | Applies to versions: 1.1, 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: PcbDrawing Commands

The following pre-packaged resource, derived from this base command, is available:

Toggle Selection

Applied Parameters: None

Summary

This command is used to change the selection status of one or more design objects in the current Draftsman document (*.PCBDwf). The command is used to change the status for one object at a time and not a group of objects simultaneously.

For a high-level look at how the Altium Draftsman Drawing System provides an interactive approach to the creation of production documentation for your PCBs, see Draftsman.

Access

In a Draftsman document (*.PCBDwf), click Edit » Select » Toggle Selection.

Use

After launching the command, objects that are currently selected will be deselected. Conversely, objects that are currently unselected will become selected.

适合打印版本

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

PcbDrawing_Cmd-ToggleSelectionToggleSelection_AD

Summary

Access

Was this page helpful?