SystemDesigner_Cmd-RotateSelectionClockwiseRotateSelectionClockwise_AD

Created: 九月 18, 2017 | Updated: 九月 20, 2017 | Applies to versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2

您正在阅读的是 19. 版本。关于最新版本，请前往 SystemDesigner_Cmd-RotateSelectionClockwise((RotateSelectionClockwise))_AD 阅读 21 版本

The following pre-packaged resource, derived from this base command, is available:

Applied Parameters: None

Summary

This command is used to rotate one or more selected module objects in a clockwise direction.

For a high-level look at multi-board design within Altium Designer, see Designing Systems with Multiple Boards.

With at least one module object selected, this command can be accessed from the Multi-board Schematic Editor by:

Choosing the Edit » Move » Rotate Selection Clockwise command from the main menus.
Using the Shift+Spacebar keyboard shortcut.

First, ensure that all modules that you wish to include in the rotation are selected in the main workspace.

After launching the command, the selected modules will be rotated clockwise by 90°.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.