SystemDesigner_Cmd-DeleteSelectedDrawingItemsDeleteSelectedDrawingItems_AD

Created: 七月 07, 2017 | Updated: 九月 18, 2017 | Applies to versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2

您正在阅读的是 19. 版本。关于最新版本，请前往 SystemDesigner_Cmd-DeleteSelectedDrawingItems((DeleteSelectedDrawingItems))_AD 阅读 21 版本

The following pre-packaged resource, derived from this base command, is available:

Applied Parameters: None

Summary

This command is used to remove the selected object(s) from the active Multi-board Schematic document (*.MbsDoc).

For a high-level look at multi-board design within Altium Designer, see Designing Systems with Multiple Boards.

With at least one object selected, this command can be accessed from the Multi-board Schematic Editor by:

First, ensure that all objects that you wish to remove are selected in the main workspace.

After launching the command, the selected object(s) will be removed from the document.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.