Altium Designer 文档
...
对话框参考
Dialogs((M to R))_AD
Sch_Dlg-RoundingcoordinatesofobjectsRounding Coordinates of Objects_AD
Created: 六月 09, 2017 | Updated: 六月 19, 2017
| Applies to versions: 15.1, 16.0, 16.1, 17.0 and 17.1
您正在阅读的是 17.1. 版本。关于最新版本，请前往 Sch_Dlg-Roundingcoordinatesofobjects((Rounding Coordinates of Objects))_AD 阅读 22 版本
The Rounding coordinates of objects dialog
Summary
The Rounding coordinates of objects dialog is used to define which documents the rounding process will be applied to - either the current document only, all schematic documents in the current (active) project, or all open schematic documents regardless of the project to which they belong.
Access
The dialog is accessed from the schematic editor by clicking Tools » Convert » Round coordinates of objects from the main menus.
Options/Controls
Choose Document Scope
- Just this document - round coordinates only for the current document.
- All schematic documents in the current project - round coordinates for all schematic documents of the current project. Schematic documents of the current project that are currently closed will be opened.
- All open schematic documents - round coordinates for all the schematic documents that are currently opened regardless of the project to which they belong.