Sch_Dlg-Form_GetCoordChoose a Snap Grid Size_AD

您正在阅读的是 20. 版本。关于最新版本,请前往 Sch_Dlg-Form_GetCoord((Choose a Snap Grid Size))_AD 阅读 21 版本
 

The Choose a snap grid size dialog
The Choose a snap grid size dialog

Summary

This dialog allows you to quickly set a different interval size for the snap grid. The snap grid pulls the cursor to the nearest point on its defined grid.

Access

From the schematic editor:

  • Use the View » Grids » Set Snap Grid command from the main menus.
  • Choose the Set Snap Grid entry on the Grids drop-down () of the Utilities toolbar (View » Toolbars » Utilities).

Options/Controls

Use the field in this dialog to enter the grid interval as required.

The entered grid size is reflected at the left-hand side of the status bar and also in the General region of the Document Options view of the Properties panel.

Tip

  • In the workspace, cycle forward (G) or back (Shift+G) through predefined grid settings. The settings available are determined by the chosen presets as defined on the Schematic - Grids page of the Preferences dialog and the current measurement system in force (Imperial or Metric). If you change the grid size in this manner, your entered setting will be lost since cycling only involves the currently chosen preset interval settings.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

软件的功能取决于您购买的Altium产品级别。您可以比较Altium Designer软件订阅的各个级别中包含的功能,以及通过Altium 365平台提供的应用程序所能实现的功能。

如果您在软件中找不到某个讨论过的功能,请联系Altium销售团队以获取更多信息。

Content