PCB_Dlg-LibraryComponentParametersPCB Library Component_AD

您正在阅读的是 15.1. 版本。关于最新版本,请前往 PCB_Dlg-LibraryComponentParameters((PCB Library Component))_AD 阅读 17.1 版本

The PCB Library Component dialog.
The PCB Library Component dialog.

Summary

This dialog allows the designer to specify various properties for the active component in the current PCB Library document.

Access

The dialog is accessed from the PCB Library Editor in the following ways:

  • With the desired component active in the main design window, use the Tools » Component Properties command from the main menus.
  • Double-click a component in the Components region of the PCB Library panel.

Options/Controls

  • Name - use this field to specify the component's name.
  • Height - use this field to specify a height for the component. This value is used by the Height design rule (part of the Placement category of rules).
  • Description - use this field to add a meaningful description for the component.
  • Type - use this field to determine the type of component. Choose from the following types, available from the field's associated drop-down menu:
    • Standard - standard electrical component loaded onto the board. Always synchronized, always in the BOM.
    • Mechanical - non-electrical component, e.g., heat sink or mounting bracket. Synchronized if it exists on both schematic and PCB documents and always included in the BOM.
    • Graphical - non-electrical component used for a company logo, title block, etc. Never synchronized and not included in the BOM.
    • Net Tie (In BOM) - for shorting two (or more) nets together in the routing. Typically used if a jumper type component needs to be fitted and also provide shorting in the same location. Always synchronized and included in the BOM.
    • Net Tie - as above but designed so you couldn't tell a component existed at the location where the shorting is to occur. Always synchronized but not included in the BOM. When placing components of this type, use the Verify Shorting Copper option in the Design Rule Checker dialog (when performing a DRC in the PCB) to verify the short (i.e., that no unconnected copper exists in the component).
    • Standard (No BOM) - standard electrical component loaded onto board. Always synchronized, not included in the BOM.
    • Jumper - used to represent a wire link, typically used on a single-sided board. On the schematic, Jumper-type components do not need to be wired in. They are only included to ensure that the Jumpers get included in the BOM. On the PCB, set the jumper pads to share the same non-zero JumperID value; the software recognizes this state, adds a symbolic link between the jumper pads to represent the wire link, and factors the link into design rule checks.
 The Type setting allows you to set the type for a footprint that is placed directly from the PCB Library onto the PCB design document. However, if the component has been placed on the schematic side and brought across to the PCB through the synchronization process, then the Type setting defined for that component - on the schematic side - will always take precedence.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

软件的功能取决于您购买的Altium产品级别。您可以比较Altium Designer软件订阅的各个级别中包含的功能,以及通过Altium 365平台提供的应用程序所能实现的功能。

如果您在软件中找不到某个讨论过的功能,请联系Altium销售团队以获取更多信息。