Altium Designer 文档
...
对话框参考
Dialogs((A to F))_AD
PCB_Dlg-IncludeSnapPointFormChoose Selectable Points_AD
Created: 二月 05, 2019 | Updated: 二月 05, 2019
| Applies to versions: 19.0, 19.1, 20.0, 20.1, 20.2 and 21
您正在阅读的是 21. 版本。关于最新版本，请前往 PCB_Dlg-IncludeSnapPointForm((Choose Selectable Points))_AD 阅读 22 版本
The Choose Selectable Points dialog
Summary
The Choose Selectable Points dialog is used to select how a point is chosen on a 3D model when running various 3D Body placement commands.
Access
This dialog is opened after running a command that requires a point on a 3D model to be selected. Run the command, click on a placed 3D model then press the Tab key. Any of the following commands can be used to access the dialog:
- Tools » 3D Body Placement » Orient And Position 3D Body.
- Tools » 3D Body Placement » Position 3D Body.
- Tools » 3D Body Placement » Set Body Height.
- Tools » 3D Body Placement » Measure Distances.
Options/Controls
Up to two point types can be included:
- Include Vertices - enable to be able to select and measure from any vertices on the 3D model.
- Include Snap Points - enable to be able to select and measure from any placed snap points on the 3D model.