Altium Designer 文档
...
对话框参考
Dialogs((A to F))_AD
PCB_Dlg-ChangeDifferentialPairDifferential Pair_AD
Created: 七月 28, 2015 | Updated: 四月 13, 2018
| Applies to versions: 15.1, 16.0, 16.1, 17.0 and 17.1
您正在阅读的是 15.1. 版本。关于最新版本，请前往 PCB_Dlg-ChangeDifferentialPair((Differential Pair))_AD 阅读 21 版本
The Differential Pair dialog.
Summary
The Differential Pair dialog allows designers to define differential pairs for PCB tracks.
Access
In the PCB panel, select the Differential Pairs Editor mode. Double-click on an existing differential pair or click Add or Edit to access the dialog.
Options/Controls
- Positive Net - Shows the positive (+) net in the current differential pair. Differential pairs use a naming convention that requires the relevant nets to use a common prefix, followed by a consistent positive/negative suffix, e.g.,
TX0_PandTX0_N. Click the arrow to view and select a net. Click in the field to edit the net name and add your positive suffix. - Negative Net - Shows the negative (-) net in the current differential pair. Differential pairs use a naming convention that requires the relevant nets use a common prefix, followed by a consistent positive/negative suffix, e.g.,
TX0_PandTX0_N. Click the arrow to view and select a net. Click in the field to edit the net name and add your negative suffix. - Name - Shows the current name for this differential pair. Edit this field to create or modify the name.