Altium Designer 文档
...
对话框参考
Dialogs((A to F))_AD
PCB_Dlg-BusRouteDialogBus Routing_AD
Created: 七月 28, 2015 | Updated: 六月 16, 2017
| Applies to versions: 15.1, 16.0, 16.1 and 17.0
您正在阅读的是 15.1. 版本。关于最新版本，请前往 PCB_Dlg-BusRouteDialog((Bus Routing))_AD 阅读 17.1 版本
The Bus Routing dialog.
Summary
This dialog allows the designer to specify bus spacing in bus routing.
Access
Select multiple pads which have been vertically aligned, then run the Multiple Traces command (Tools » Legacy Tools » Multiple Traces). Click on the top pad in the selection and as you move the cursor traces should appear. When they do, hit the Tab key to open this dialog.
Options/Controls
Bus Routing
- Bus Spacing - Manually specify the bus routing.
- From Rule - Assign bus spacing based on the existing design rule.