UnifiedComponent_Cmd-CopyCopy_AD

Created: апреля 10, 2019 | Updated: апреля 10, 2019 | Applies to versions: 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5

Вы просматриваете версию 2.0. Для самой новой информации, перейдите на страницу UnifiedComponent_Cmd-Copy((Copy))_AD для версии 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: UnifiedComponent Commands

The following pre-packaged resource, derived from this base command, is available:

Copy

Applied Parameters: None

Summary

This command is used to copy the content of one or more selected editable cells from the active Component Library document to the clipboard.

Access

With one or more editable cells selected in the main grid region, this command can be accessed from the Component Library Editor when configured in Batch Editor mode by:

Choosing the Edit » Copy command from the main menus.
Clicking the button on the Component Library Standard toolbar.
Right-clicking over a cell in the selection and choosing the Copy command from the context menu.
Using the Ctrl+C keyboard shortcut.

If the Component Library Editor is currently in Single Component Editor mode, switch to the Batch Editor mode using the Tools » Switch to Batch Editor command.

Use

First, select the cell(s) whose value(s) you want to copy. After launching the command, the selected data will be copied to the clipboard.

Tips

Copy data into an external spreadsheet application, from where changes can be made as required using the cell editing power that only a spreadsheet editor can bring. Then paste the altered data back into the Component Library file - an expedient way to build component definitions.

Версия для печати

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

UnifiedComponent_Cmd-CopyCopy_AD

Summary

Access

Use

Tips

Was this page helpful?