LayerStackManager_Cmd-UndoUndo_AD

Created: декабря 04, 2018 | Updated: марта 06, 2024 | Applies to versions: 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5

Вы просматриваете версию 2.0. Для самой новой информации, перейдите на страницу LayerStackManager_Cmd-Undo((Undo))_AD для версии 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: LayerStackManager Commands

The following pre-packaged resource, derived from this base command, is available:

Undo

Applied Parameters: None

Summary

This feature is used to restore the active Layer Stack to its state previous to the last operation. Multiple levels of undo are supported.

Access

This command can be accessed from the Layer Stack by:

Choosing the Edit » Undo command from the main menus.
Clicking the button on the Quick Access bar.
Using the Ctrl+Z keyboard shortcut.

The command only becomes available provided a change to the Layer Stack has been made.

Use

After launching the command, the last operation will be 'undone' and the Layer Stack will be returned to its previous state. Use the command repeatedly to undo previous operations.

Tips

A command that has been 'undone' using this command can be 'redone' using the Redo command.

Версия для печати

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

LayerStackManager_Cmd-UndoUndo_AD

Summary

Access

Tips

Was this page helpful?