Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 2.0
43.23.13.02.12.01.1
Close
Поиск Search on Documentation

Defining General Collaboration Preferences for Altium NEXUS

Created: октября 16, 2019 | Updated: октября 16, 2019 | Applies to version: 2.0
Вы просматриваете версию 2.0. Для самой новой информации, перейдите на страницу Defining General Collaboration Preferences for Altium NEXUS для версии 4

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: Collaboration Preferences

The Collaboration - General page of the Preferences dialogThe Collaboration - General page of the Preferences dialog

Options/Controls

General

  • Export Component parameters - option not implemented

 

looks like a feature to export the component parameters to MCAD, option has been present since AN1 (AD18), but not sure how it is supposed to export component parameters since they are not present in the PCB until AN3 (AD20)...

  • Check to see if the params are extracted from the sch
  • Check to see if it works in AN3 (when params became available in PCB components)

From discussions with Nikolai Nyrkov it seems that this option was never enabled. It is going to be removed because when export of component parameters is enabled it will always occur (so no option needed)

 

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.