Off-Grid Object – Объект вне сетки
This document is no longer available beyond version 21.0. Information can now be found here: Off-grid object for version 24
Parent category: Violations Associated with Others
Default report mode:
Summary
This violation occurs when an object is not aligned to the current Snap grid.
Notification
If compiler errors and warnings are enabled for display on the schematic (enabled on the Schematic - Compiler page of the Preferences dialog), an offending object will display a colored squiggle beneath it. Hovering over the object will display a pop-up hint that summarizes the violation. A notification is also displayed in the Messages panel in the following format:
Off grid <ObjectIdentifier> at <Location>
where:
ObjectIdentifier
identifies the specific object that is currently off-grid. The identifier is composed of the object's type and its name/designator (e.g.,Pin <PinDesignator>
).Location
is the X,Y coordinates for the object's electrical hotspot.
Recommendation for Resolution
Ensure that the Snap grid is defined as required and enabled in the General section on the General tab of the Properties panel (accessed when no objects are currently selected in the design workspace). The offending object can be moved back onto grid manually or by using the Edit » Align » Align To Grid command.
Tip
- Object hints will only appear provided the Enable Connectivity Insight option is enabled on the System - Design Insight page of the Preferences dialog. Use the controls associated with the Object Hints entry in the Connectivity Insight Options region of the page to determine the launch style for such hints (Mouse Hover and/or Alt+Double Click).