Документация Altium Designer
...
((Dialog Reference))_AD
Dialogs((G to L))_AD
PCB_Dlg-Form_GetMoveSelectionOffsetsInteractivelyDlgGet X-Y Offsets_AD
Created: февраля 22, 2018 | Updated: февраля 22, 2018
| Applies to versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2
Вы просматриваете версию 19. Для самой новой информации, перейдите на страницу PCB_Dlg-Form_GetMoveSelectionOffsetsInteractivelyDlg((Get X-Y Offsets))_AD для версии 22
The Get X/Y Offsets dialog
Summary
This dialog provides controls to move one or more currently selected objects by a specified distance in the horizontal (X) and/or vertical (Y) planes.
Access
The dialog can be accessed from the PCB Editor and the PCB Library Editor by choosing the Edit » Move » Move Selection by X, Y command from the main menus.
Options/Controls
- X Offset - use this field to specify the distance by which the selection should be moved along the horizontal axis. Positive and negative values can be specifed depending on the direction of movement required. Use the button to the right of this field to quickly toggle the entered value between positive or negative.
- Y Offset - use this field to specify the distance by which the selection should be moved along the vertical axis. Positive and negative values can be specifed depending on the direction of movement required. Use the button to the right of this field to quickly toggle the entered value between positive or negative.
- Toggle X/Y Offsets - click this button to quickly swap the offset values. The X Offset value will be used as the Y Offset value and vice versa.
- Reset X/Y Offsets - click this button to quickly reset both offset values to zero.
- Define X/Y Offsets Interactively - click this button to have the offsets calculated interactively. You will be taken to the workspace and prompted, in turn, to choose a start and end point. Click at the desired locations; the dX and dY values will be entered into the X Offset and Y Offset fields, respectively.