Altium Designer Documentation
...
((Dialog Reference))_AD
Dialogs((A to F))_AD
WorkspaceManager_Dlg-AnsysEDBExportOptionsAnsys EDB Export Options_AD
Created: Kwiecień 27, 2021 | Updated: Maj 11, 2021
| Applies to version: 21
This document is no longer available beyond version 21. Information can now be found here: Exporting the PCB in ANSYS EDB Format for version 25
Summary
The Ansys EDB Export Options dialog is used to configure what is to be included when exporting Ansys EDB files.
Access
The dialog is accessed from the PCB editor by selecting File » Export » Ansys EDB.
Options/Controls
Component Types
- Resistors - enter the resistor component value that is mapped to the property for RLC components in the Ansys component model that you want to be included in the export process.
- Capacitors - enter the capacitor component value that is mapped to the property for RLC components in the Ansys component model that you want to be included in the export process.
- Inductors - enter the inductor component value that is mapped to the property for RLC components in the Ansys component model that you want to be included in the export process.
- Integrated Circuits - enter the integrated circuit component value that is mapped to the property for RLC components in the Ansys component model that you want to be included in the export process.
- Input/Output - enter the input/output component value that is mapped to the property for RLC components in the Ansys component model that you want to be included in the export process.
Units
Select either Imperial or Metric to be used as the preferred unit of measurement during export.
Others
Merge Net Tie Nets - when enabled, if a design contains nets connected by Net-Tie components, these nets will report as distinguished single nets in the netlist.