WorkspaceManager_Dlg-EditString_FormDCode_AD
Created: Październik 07, 2021 | Updated: Październik 08, 2021
| Applies to version: 21
This document is no longer available beyond version 21. Information can now be found here: Generating Gerber Fabrication Data for version 25
Summary
The DCode dialog allows you to specify a DCode string for an aperture.
Access
This dialog is accessed by clicking New on the Apertures tab of the Gerber Setup dialog.
Options/Controls
Enter a number from 10 to 999 for the aperture DCode string.