Sch_Dlg-LibraryRuleCheckDialogLibrary Component Rule Check_AD

Created: October 11, 2017 | Updated: October 11, 2017 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1 and 3.2

Now reading version 3.1. For the latest, read: Sch_Dlg-LibraryRuleCheckDialog((Library Component Rule Check))_AD for version 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Library Component Rule Check dialog

Summary

The Library Component Rule Check dialog provides controls to run a component rule check in the schematic library editor that generates a text report for specified settings.

Access

From the schematic library editor, click Reports » Component Rule Check from the main menus.

Options/Controls

Duplicate

Component Names - enable this option to check for duplicated component names.
Pins - enable this option to check for duplicated pins.

Missing

Description - enable this option to check for missing descriptions.
Footprint - enable this option to check for missing footprint names.
Default Designator - enable this option to check for missing default designators.
Pin Name - enable this option to check for missing pin names.
Pin Number - enable this option to check for missing pin numbers.
Missing Pins In Sequence - enable this option to check for missing pins in a sequence.

프린터 출력용 버전

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.