Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium On-Prem Enterprise ServerAltium CircuitMakerAltium CircuitStudioCompany DashboardAltium Infrastructure Server
Ver: Version: 5
543.23.13.02.12.01.11.0
Close
Search Search on Documentation
Documentation Altium NEXUS Documentation ... ((Dialog Reference))_AD Dialogs((G to L))_AD

Sch_Dlg-LibraryRuleCheckDialogLibrary Component Rule Check_AD

Created: July 07, 2022 | Updated: July 07, 2022 | Applies to version: 5

Nexus message

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

 



The Library Component Rule Check dialog

Summary

The Library Component Rule Check dialog provides controls to run a component rule check in the schematic library editor that generates a text report for specified settings.

Access

From the schematic library editor, click Reports » Component Rule Check from the main menus.

Note that the Library Component Rule Check dialog will not be available when editing a Workspace component's new symbol created with the New command from the associated menu of the button below the Add Symbol section in the Component Editor in its Single Component Editing mode. Symbol validation can be performed as part of the Component Rule Check that is run when saving a component back to the Workspace, or when selecting the Tools » Component Rule Check command, from the main menus. Checks are configured on the Data Management – Component Rule Checks page of the Preferences dialog.

See the Running a Component Rule Check section of the Single Component Editing page to learn more.

Options/Controls

Duplicate

  • Component Names – enable this option to check for duplicated component names.
  • Pins – enable this option to check for duplicated pins.

Missing

  • Description – enable this option to check for missing descriptions.
  • Footprint – enable this option to check for missing footprint names.
  • Default Designator – enable this option to check for missing default designators.
  • Pin Name – enable this option to check for missing pin names.
  • Pin Number – enable this option to check for missing pin numbers.
  • Missing Pins In Sequence – enable this option to check for missing pins in a sequence.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
콘텐츠